Body lift question
#1
Member
Thread Starter
Join Date: Jan 2009
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Grand Cherokee
Engine: Inline 6 4.0
Body lift question
Hey, I have a question about body lifts. I was looking into buying a 3-4.5 inch body lift , but my friend who put a 3" inch lift on his blazer said that it caused his trucks steering to go wacky and that his truck in general is just not right. So my question is should i just save and spend the money on an actual lift kit or just get a body lift
#2
CF Veteran
Join Date: Nov 2008
Location: Oak Harbor, WA.
Posts: 6,989
Likes: 0
Received 4 Likes
on
4 Posts
Year: 1987
Model: Cherokee
Engine: 4.0 liter RENIX I-6, DIY Cold Air Intake, 2.5 FM Exhaust, 3 Core Radiator
I'm an XJ guy, Bro, but, I believe Grand Cherokees are Unibody frame just like regular Cherokees. If that is the case, you can't put a body lift on one.....
#3
CF Veteran
Join Date: Sep 2008
Location: HAMMOND IN
Posts: 2,418
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
x2 cherokees are unibody so the body is the frame so you should look at kits (not body) also with any lift you should get a alinement witch could have been you buddys problem
#4
CF Veteran
Join Date: Sep 2008
Location: HAMMOND IN
Posts: 2,418
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
how high are you looking to go?
heres a couple kits
http://rustysoffroad.com/mm5/merchan...ode=sus_zj_kit
http://rustysoffroad.com/mm5/merchan...ode=sus_zj_kit
http://www.roughcountry.com/jeep_zj_1.html
http://www.roughcountry.com/jeep_zj_4.html
heres a couple kits
http://rustysoffroad.com/mm5/merchan...ode=sus_zj_kit
http://rustysoffroad.com/mm5/merchan...ode=sus_zj_kit
http://www.roughcountry.com/jeep_zj_1.html
http://www.roughcountry.com/jeep_zj_4.html
Last edited by REWSTER; 02-02-2009 at 08:45 PM.
#5
Member
Thread Starter
Join Date: Jan 2009
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Grand Cherokee
Engine: Inline 6 4.0
They are unibody so i guess that means no for body lift. thanks for helping me i don't know to much about this **** but I'm learning. Thanks BuckB91XJ
#7
CF Veteran
Join Date: Apr 2008
Location: Northern Illinois
Posts: 2,237
Likes: 0
Received 3 Likes
on
3 Posts
Year: 90
Model: Cherokee
Engine: 4.0
If you figure out how to get a body lift on a Grand Cherokee, you will be a VERY rich man.....
Its a unibody vehicle, not a body on frame vehicle. So you can't put a body lift on it.
But yes, if not done correctly a body lift can screw up the steering geometry of a truck.
Its a unibody vehicle, not a body on frame vehicle. So you can't put a body lift on it.
But yes, if not done correctly a body lift can screw up the steering geometry of a truck.
Trending Topics
#10
CF Veteran
Join Date: Sep 2008
Location: HAMMOND IN
Posts: 2,418
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
the "pucks" go in between your coils and springs and a body lift would go in between the body and frame,
i updated one of my previous post with a couple lift kits the second rustys is a "puck" kit
ther is plenty more kits out there but thoes are the sites i had bookmarked
i updated one of my previous post with a couple lift kits the second rustys is a "puck" kit
ther is plenty more kits out there but thoes are the sites i had bookmarked