Auto headlights.
So I need help with triggering the automatic head lights. So I bought the rain tracker auto wiper system for my 01 WJ. It work well. But my problem is it will not trigger the auto headlights.
3 things 1. The option IS set to turn on the lights when the wipers are on, they do this when I use the switch. 2. I always have the automatic headlights on, when it gets dark outside. 3. So there are only 3 wires coming out of the switch going to the world. For the fromt wipers. As it stands now all 3 are being used to activate the wipers them selves. And I can not see in any wireing diagram where the wiper system interacts with the light system. What I think my options are? I am guess the bcm is looking for some resistance on one of the wires. I am hoping you can help me there. Or Can I just use the sensor on the dash for the lights themselves? If I just use a relay to ground that wire, would that turn on the lights normally. Or Is there some wire coming out of the back that I want. I just would like the lights to turn on when I am using the aftermarket auto-wipers as well. Here is what I have http://www.raintracker.com/ Thanks |
Sorry, I don't have the answers you need. Maybe you can find them here. >->http://www.wjjeeps.com/lamps/headlamps.htm
Or here. >->http://www.wjjeeps.com/rainsense.htm |
Thank, i have looked at those pages before. But i get seem to find anything different at the switch from having the auto light option on and off.
Because the auto-wiper module basically acts like the switch. So it should be doing exactly what the switch is doing....humm... |
Update, I have been able to find a way to use the sensor to also trigger the lights when i want. But, there is a delay on the lights if I go that route.
Also, I can't find a way to get them to stay on. yeah... |
All times are GMT -5. The time now is 12:45 PM. |
© 2024 MH Sub I, LLC dba Internet Brands