how do i reset the oil message after an oil change for a 2004 jeep gran cherokee?
#1
Newbie
Thread Starter
Join Date: Apr 2018
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee(SJ)
how do i reset the oil message after an oil change for a 2004 jeep gran cherokee?
2004 jeep gran Cherokee, how do I reset the oil message after an oil change?
#2
Old fart with a wrench
Welcome to CF!
IF your overhead VIC is the same as mine on the 2000, press "Step" until you get to "Distance to service." Then press and hold "Reset" until it changes to whatever your set interval is. I have mine set at 5000. Then press "Step" until you get to whatever you want to monitor. I usually have mine on Compass/Temp. You may only have to press "reset" when it shows "Service engine," IDR.
The VIC on mine can be set to display in 5 different languages and metric measurements.
IF your overhead VIC is the same as mine on the 2000, press "Step" until you get to "Distance to service." Then press and hold "Reset" until it changes to whatever your set interval is. I have mine set at 5000. Then press "Step" until you get to whatever you want to monitor. I usually have mine on Compass/Temp. You may only have to press "reset" when it shows "Service engine," IDR.
The VIC on mine can be set to display in 5 different languages and metric measurements.
Last edited by dave1123; 04-16-2018 at 09:35 PM.
Thread
Thread Starter
Forum
Replies
Last Post
XJwonders
Technical Write-Up/How To Section
4
12-03-2023 07:09 PM
wags70ss
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
32
06-09-2020 05:03 PM
wolfaaron
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
05-31-2015 11:26 AM
rdr8887
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
65
08-22-2014 11:12 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)