95 ZJ Heater / AC change readout from Centigrade to Fahrenheit
 

Hello,

I have a 95 ZJ Limited, the VIC quit working so it was removed.

It does have an overhead console that seems to be working.

The Heater / AC readout was in Fahrenheit but currently the readout is in Centigrade

How do I switch back to Fahrenheit?

Just press the US/M push button to the left of the display to toggle between US units, like °F + MPG and Metric, like °C and l/100km.

Here's a pic of a ZJ's heater / ac temperature control panel

https://i.ebayimg.com/thumbs/images/...Iok/s-l225.jpg

Ok I tried using the overhead console's left button and it controls the heater / ac display's C & F deg.

I'm uncertain if the overhead console's settings are working correctly after holding it's two buttons down simultaneously. I'll need read through the FSM again about configuring it's settings to determine if it's settings are working. It's a replacement pull from a JY as the original was broken.

So if the overhead console isn't working then the heater / ac display becomes stuck on whatever it's been set to?