2 questions I haven't seen answered about D35-D44a swap.
#1
Newbie
Thread Starter
Join Date: Sep 2011
Location: Gainesville, Ga.
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Grand Cherokee
Engine: 5.2
2 questions I haven't seen answered about D35-D44a swap.
I'm doing the old D35-D44a swap as the 35 has had it and I have the 44a sitting here. I've researched but haven't seen two questions answered:
1) I'm going from drum brakes on the 35 to discs on the 44a. Will I have to change any brake lines or the master cylinder for the change in brake pressure due to the calipers?
2) Will any sensors or the speedo be affected?
Thanks for any input.
1) I'm going from drum brakes on the 35 to discs on the 44a. Will I have to change any brake lines or the master cylinder for the change in brake pressure due to the calipers?
2) Will any sensors or the speedo be affected?
Thanks for any input.
#2
Seasoned Member
Join Date: Jun 2009
Location: Earth
Posts: 337
Likes: 0
Received 19 Likes
on
16 Posts
Year: 1998
Model: Grand Cherokee
Engine: 5.9 V8
For question 2, your speedometer gets input from your transfercase. As for question 1, I'd bet you should have to change out the brake system. You could easily acquire all the hardware from a jy.
Thread
Thread Starter
Forum
Replies
Last Post
imfromthelou
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
09-12-2015 07:48 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)