Jeep Cherokee Forum

Jeep Cherokee Forum (https://www.cherokeeforum.com/)
-   Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here! (https://www.cherokeeforum.com/f5/)
-   -   02 Sensor 2002 Grand Cherokee Bank 2 Sensor 1 (https://www.cherokeeforum.com/f5/02-sensor-2002-grand-cherokee-bank-2-sensor-1-a-222335/)

alphan 02-15-2016 11:21 AM

02 Sensor 2002 Grand Cherokee Bank 2 Sensor 1
 
Hello, the error codes are "P0051" and "P0152", "Bank 2 Sensor 1"

I think this is up stream referring to "Sensor 1" but what does "Bank 2" refer to, front or rear of the manifold (While looking at front of car)? This is a straight 6. Does anyone know the Mopar part number and the NTK part number?

Thank you

CR-Snow 02-15-2016 11:36 AM

Bank 2 is the rear 3 cylinders. Sensor 1 is upstream. Go with the NTK. Some suggest replacing the downstream as well because it uses the upstream for reference in determining cat efficiency

Fred/N0AZZ 02-15-2016 11:46 AM

To the OP welcome to the forum!


If you will look at the sections closer there is a Grand Cherokee section that may be more helpful to you.

alphan 02-15-2016 12:51 PM

OK, so the sensor on the manifold closest to the firewall?



Originally Posted by CR-Snow (Post 3213668)
Bank 2 is the rear 3 cylinders. Sensor 1 is upstream. Go with the NTK. Some suggest replacing the downstream as well because it uses the upstream for reference in determining cat efficiency


alphan 02-15-2016 12:52 PM

So, the sensor on the manifold closest to the firewall?

CR-Snow 02-16-2016 05:25 AM

Bank 2 is closest to the firewall. Sensor 1 is closest to the head

dave1123 02-16-2016 03:50 PM

IDK if this helps or not, but my 2000 4.0 with CA emissions doesn't seem to have downstream sensors, or at least none that I can find. There is one on each cat, but the pipe after that goes into a round can before the muffler with no electrical connections.

alphan 02-18-2016 01:17 AM


Originally Posted by CR-Snow (Post 3214000)
Bank 2 is closest to the firewall. Sensor 1 is closest to the head

That worked, I used NTK part, the dealer part had to be ordered. I read some posts that people had good luck with NTK. The check engine light is off and it seems to work fine.

Thank you for your help.

Al


All times are GMT -5. The time now is 02:48 PM.


© 2024 MH Sub I, LLC dba Internet Brands