Xj problem
#1
Newbie
Thread Starter
Join Date: May 2018
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee(SJ)
Xj problem
I have a 2000 xj, I'm putting a motor out of a 96 xj in it. I know the 2000 had coil packs and the 96 had distributor, what do I need to do in this situation??
#7
Seasoned Member
Join Date: Nov 2012
Location: Fort Collins, Colorado
Posts: 327
Likes: 0
Received 4 Likes
on
3 Posts
Year: 1998 (buggy), 1998 DD
Model: Cherokee
It's going to take a bit more wiring and swap out than you might think.
It might be easier to try to convert the 96 to coil pack completely.
It might be easier to try to convert the 96 to coil pack completely.
Trending Topics
#9
CF Veteran
Yes use all the wiring and computer from the 2000, don't try to mix and match the harnesses or you'll end up with a nightmare. The biggest problem would be finding a way to mount the coil rail on the 96 head.
#11
CF Veteran
Join Date: Oct 2013
Location: Greenville, SC
Posts: 5,920
Likes: 0
Received 190 Likes
on
165 Posts
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0
Originally Posted by Cody Cole
So there is no possible way to wire up the distributor???
#14
CF Veteran
Join Date: Oct 2013
Location: Greenville, SC
Posts: 5,920
Likes: 0
Received 190 Likes
on
165 Posts
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0
Originally Posted by Cody Cole
I'm thinking I'm just gonna remove the engine harness and computer from the 2000 and put the engine harness and computer out of the 96 in it