xj buggy project
3 Attachment(s)
I am new here and thought I would share my build
I have an 87 xj that rolled and as of that started the build Attachment 314180 Attachment 314181 Attachment 314182 |
1 Attachment(s)
|
3 Attachment(s)
|
.
|
interesting...
you're gonna wanna keep that thing plumb true as you weld the tubes in. but i'm sure you already know that. i would start with frame stiffeners. keep us posted. |
11 Attachment(s)
Picked up a new hood and cut it down and hammered in the fender wells
Relocated the gas tank Attachment 314164 Attachment 314165 Attachment 314166 Attachment 314167 Attachment 314168 Attachment 314169 Attachment 314170 Attachment 314171 Attachment 314172 Attachment 314173 Attachment 314174 |
Put in a dash from a yj and fit it to work then threw aluminum over it
|
The frame if you would is just too beat up for a frame stiffners set but I should do something
|
1 Attachment(s)
|
I have an 8.8 in the rear 4.56 welded and just a 30 4.56 and a lock right up front I don't know how long I will be keeping this setup there had been a couple conundrum with the front it gets irritating!
|
5 Attachment(s)
This is the end result at the time it wheeled good for what it is Evan though it did not have that much flex kinda like driving a brick with tires but fun! Attachment 314157 Attachment 314158 Attachment 314159 Attachment 314160 Attachment 314161
|
So it's time for linking up the rear and getting rid of the whole back end
|
2 Attachment(s)
|
1.25 hiems except the ones on the truss they are 7/8s
|
4 Attachment(s)
So I started cutting and mocking up tubes for placement
Attachment 314151 Attachment 314152 Attachment 314153 Attachment 314154 |
All times are GMT -5. The time now is 04:33 PM. |
© 2024 MH Sub I, LLC dba Internet Brands