WyoCherokee's half blooded twin.
 

Introducing project "half blooded twin"
https://cimg1.ibsrv.net/gimg/www.che...fd38fadd7d.jpg
A 1990 xj Limited......or what's left of it anyways. Interior is gutted. "In prep for rhino line" is what he told us:
https://cimg4.ibsrv.net/gimg/www.che...646bfd207b.jpg
https://cimg6.ibsrv.net/gimg/www.che...e0a9c3d753.jpg
Come to find out, he threw away the carpet and the trim because they were "unsaveable". Well at least i have a blank canvas. As if I don't have enough projects.

The ​​​​​​specs:
​​​​4.0
Aw4
Power everything
Leather seats(or what's left of em)

180k miles
New fuel pump and sending unit
Bendix 9 :-(
Dana 35 rear :-(
2"ome rear leafs
2" rough country coils
Brand new​​​​​​ Firestone Mt's 31x10.5x15
Custom made roof rack.
Affordable off road bumpers front and rear

Comes with:
Non c clip Dana 35, housing and shafts only
Arb locker for said Dana 35
Roll cage (never opened, still in package)
Disc brakes for the non c clip 35

https://cimg9.ibsrv.net/gimg/www.che...d5223bd502.jpg

As far as plans .....
Find a donor xj with good interior and Chry8.25 and good 30, sell the d35 and arb, sell the roll cage, rhino line the floor, Dutch the bendix 9 for a standard brake system. Do something with the paint...

first major change.... swapped in ZJ steering. no more slop in the steering. just ordered a new stabilizer, and will be picking up some 2nd hand upper and lower control arms. next step is to throw on some rusty's 4.5" coils and lift shackles i found in my parts pile.

Purchased a set of 746 injectors and a headlight harness, have a lead on a donor 89 XJ. but the guy is terrible about responding backto me. he only wants 400. i told hi i have cash in hand. (not very) patiently waiting to go get it.

Sooooh this followed me home.....a 94 sport. It will serve as a donor for the interior, fenders and miscillanious. The rest I will part out, and already have a waiting list of folks. Some parts will go to my comanche.....like the header panel and the doors. I also snagged a Ford 8.8 with 3.73s and a tnt truss for it for $200 total. So the 8.8 and truss will go under the half blooded twin.
https://cimg4.ibsrv.net/gimg/www.che...807f72ab0f.jpg

Well I've made allot of progress today on the half blood. Got a good chunk of the interior swapped over and cured the very minimal amount of rust.
https://cimg1.ibsrv.net/gimg/www.che...cf6233c122.jpgMy obsession
https://cimg3.ibsrv.net/gimg/www.che...25b7ad29d8.jpgGutted
https://cimg5.ibsrv.net/gimg/www.che...b26b50ddfc.jpgPainted any bare metal
https://cimg8.ibsrv.net/gimg/www.che...df18bb3d19.jpgCarpet guardian
https://cimg0.ibsrv.net/gimg/www.che...66b510ef21.jpgRear carpet and trim in
https://cimg1.ibsrv.net/gimg/www.che...931f01738d.jpgFront carpet in
https://cimg2.ibsrv.net/gimg/www.che...0553743f19.jpgCenter console and driver seat in.

Both seats and all lower trim in. Tomorrow will be the upper trim, and the headliner.

https://cimg0.ibsrv.net/gimg/www.che...41981549d8.jpg
https://cimg1.ibsrv.net/gimg/www.che...8a6ef9e0ee.jpg

Got the headliner and upper trim in. I had to lengthen the dome light wire, as the 94 dome light was overbthe back seat, and the 90 was close to the hatch.
https://cimg6.ibsrv.net/gimg/www.che...38578fa82e.jpg

Nice find man. are you planning on painting it?

Yep...Rustoleum camoflauge green hahaha. I dont have the coin to even do a single stage paint on it. and it will be a pure camping rig, so im not to terribly worried about paint. I still need to tape off the windows and finish the rattle can job. eventually i will probably Grizzly Grip paint it. The MJ will probably get a decent single stage paint job at some point. more so now that it was blue doors and a red body. :cursing:

Spent the day stripping the donor xj. Pulled the transfer case, transmission, complete dash, and the fenders. I was originally going to sell the transfer case and linkage to a guy, but during conversation, he decided he wanted to buy the whole thing, of course after i yanked the transfer case and transmission. So I spent the day scavenging what I needed.
https://cimg3.ibsrv.net/gimg/www.che...edb13ed8a4.jpg

I snagged the dirtbound crossover steering during black Friday. Looks pretty well put together and identical to cav fab.
https://cimg4.ibsrv.net/gimg/www.che...55c238be6b.jpg
https://cimg7.ibsrv.net/gimg/www.che...f45ebd51a8.jpg
https://cimg2.ibsrv.net/gimg/www.che...aa7f1d51a2.jpg
https://cimg4.ibsrv.net/gimg/www.che...11d774236f.jpg

I love the fact that you have no neighbors. At least what I can tell from the pictures. Our next house will be in the country.

My nearest neighbor is just across the street, but still within 100 yards. next closest house is about 400 yards. I own 5 acres. Rural communities are the best. 1 neighbor plows my driveway in the winter, and i give him Goose Jerky.

Installed the headlight harness, touched up my rattle can paint job, installed the Dirtbound Steering, M.O.R.E off road steering brace, and the Rubicon Express track bar/brace/bracket assembly and removed the sway bar. Deffinate improvement in steering over the wornout tie rod ends.
https://cimg9.ibsrv.net/gimg/www.che...2824e209e7.jpgSteering box brace
https://cimg1.ibsrv.net/gimg/www.che...31cf5f4dfd.jpg
https://cimg2.ibsrv.net/gimg/www.che...9520141671.jpgInstalling the headlight harness
https://cimg3.ibsrv.net/gimg/www.che...ebf010a7b0.jpgGot rid of the two-tone green red.
https://cimg4.ibsrv.net/gimg/www.che...bc19822a62.jpgDirtbound steering and RE track bar setup.

Nice job!! I still have to get my track bar and brace installed from RE. Along with a bunch of other suspension parts. How do you like the track bar and the steering now? I know you said if feels better but have you taken it for longer drives yet? What size lift did you have on it or do have on it?