The white Cherokee
#18
Junior Member
Thread Starter
Join Date: Sep 2012
Location: Bensalem pa
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Got the 6 degree shims and my 4th u bolt seemed to fix my problems
Also did the v8 tie rods upgrade
It's at the alignment shop now so when I get it back I'm going over all the bolts and grease fittings
More pics to come tonight or tommorrow
Also did the v8 tie rods upgrade
It's at the alignment shop now so when I get it back I'm going over all the bolts and grease fittings
More pics to come tonight or tommorrow
#20
Junior Member
Thread Starter
Join Date: Sep 2012
Location: Bensalem pa
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
#21
Junior Member
Thread Starter
Join Date: Sep 2012
Location: Bensalem pa
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Put 12oz of airsoft bb's in each tire took it to the alignment shop and when I drove back I took it on 95 60-70 mph no problems !!
Also stretched its legs out a little ...
Tonight I ran the wheel over it a little to see if it would come up at all and to my surprise it actually don't look to bad !
Hopefully I will be taking it out this weekend to put it in 4lo been a while since I been behind a jeep in the woods
Also stretched its legs out a little ...
Tonight I ran the wheel over it a little to see if it would come up at all and to my surprise it actually don't look to bad !
Hopefully I will be taking it out this weekend to put it in 4lo been a while since I been behind a jeep in the woods
#23
Junior Member
Thread Starter
Join Date: Sep 2012
Location: Bensalem pa
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
#24
Junior Member
Thread Starter
Join Date: Sep 2012
Location: Bensalem pa
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Ok finally got to take it out and over all I'm very happy with it, it went up or threw everything I pointed it at ....
As always, much needed pictures
As always, much needed pictures
#27
Junior Member
Thread Starter
Join Date: Sep 2012
Location: Bensalem pa
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Started my snorkel, never was a fan of the ones hanging off the side of the trucks...
Started to seal it all up , just need to get a 3inch flexible rubber hose to connect them both together , I didn't want to do a solid center piece just because it would make it thought it get the intake out ....
I also got my square stock for rocker guards and bumpers
Started to seal it all up , just need to get a 3inch flexible rubber hose to connect them both together , I didn't want to do a solid center piece just because it would make it thought it get the intake out ....
I also got my square stock for rocker guards and bumpers
#29
CF Veteran
Join Date: Nov 2011
Location: Manchester, N.H.
Posts: 1,122
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 HO