The white Cherokee
2 Attachment(s)
I just want to say this will be my 3rd xj all work will be done by me.... however this is my first build thread and I'm gonna try to take as many pictures as possible i do work nights so most work will be done on off days or free time I'm also a parent and she comes first along with the fiance then my job then my hobbies .... With that said I'm gonna start my build now I like input and advise negative *comments are welcome also*:2guns::2guns:
I have been looking for a while around cl and other places for a decent Cherokee meanwhile trying to sell my truck I was looking for 4 dr Cherokee stick or auto, *miles don't scare me " more so a bragging right then anything" my previous Cherokee had 230xxx and my grand Cherokee had around the same...... so a buddy of mine told me that his parents were going to try and sell there cherokee again " I had tried buying this around 2 years ago " so now I had something lined up to buy *so I**sold my 06 ram 2500 ... So I turned around and bought this the same day, it's a 92 white Cherokee 4dr sport off my buddy for 600 it has the 4.0, aw4, 231 , manual doors no options.... My plan of attack ... Fix passenger side floor it's all rotted out Exhaust needs work 4.5 rc lift* 33's* Front & Rear bumpers with tire carrier* Fold rear lower quarters Undercoat bottom of doors Trim front fenders* Trim and fold rear wheel wells Lincoln lock the rear* Doorless Homemade snorkel Attachment 360265 yesterday when I got it home Attachment 360266 33x12.5x15 sure swamper tsl 2 are radial and 3 are bias ply , the 2 radials are going up front 2 2 bias ply are going on the rear and saving the 5th for my rear tire carrier that's about all I have for now I should have the floor and exhaust finished by tommorrow , more pics then |
5 Attachment(s)
Pass side floor was gone
Attachment 360239 it was actually alot more then I thought Attachment 360240 Started cutting and fitting pieces to patch it up Attachment 360241 Attachment 360242 almost there got to mark some lines cut a little here and there ... Attachment 360243 When I'm all done cutting and fitting I will be taking it all back out, panel-bond every corner and crevice.... then I will go ahead and screw it all back down, then tack-weld, panel-bond the rest of it all in.... After all that's done I will be applying some her liner or undercoating |
Wow, that's a lot of rust!
|
6 Attachment(s)
Here is some of my other jeeps that I've built
The day I got it Attachment 360233 When I sold it 4in with 34x12.5x15 trxxus mud terrain Attachment 360234 4.5 rough country with 33 x12.5 tsl's radial Attachment 360235 The green one was also mine I sold it to a close friend after getting the 97 Attachment 360236 My wrangler , I got it already lifted I added tires , winch and other small stuff Attachment 360237 Fun all day adventure I ran out of gas Attachment 360238 |
Originally Posted by sthon
(Post 2030835)
Wow, that's a lot of rust!
|
Finally got another jeep haha
|
Originally Posted by TheHulk95xj
(Post 2031613)
Finally got another jeep haha
|
3 Attachment(s)
Lift and wheels came in !!
Attachment 360152 Attachment 360153 Attachment 360154 Sunday I will be doing the lift in the meantime I'm still finishing the floor, exhaust and other odds and ends |
4 Attachment(s)
I also cut and folded the rear wheel wells and the rear lower quarter
It's all clamped right now because my welder, the whip started acting up I'm getting a new one tommorrow Attachment 360148 Flowmaster Attachment 360149 Rear quarters Attachment 360150 Attachment 360151 |
I'm thinking about bed lining the quarters , what do you guys think ...
Also looking into otk system does anybody have any experience with any reasonably priced systems? |
Originally Posted by Smittybuilt88
I'm thinking about bed lining the quarters , what do you guys think ...
Also looking into otk system does anybody have any experience with any reasonably priced systems? |
Originally Posted by A Black Cherokee
(Post 2035064)
I did it. Go for it, looks good.
|
2 Attachment(s)
Lift is all on just need to do alignment and 6 degree shims and I should be good to go
Lift 4.5 rough country full leaf Wheels rcx street locks Tires 33x12.5x15 SS tsl Attachment 359819 Attachment 359820 |
what a pain in the *** lift to do lol. My wrangler was smoooth sailing to put on. Damn cherokees :cursing: .... Looks tough though I like it.
|
Originally Posted by TheHulk95xj
(Post 2040894)
what a pain in the *** lift to do lol. My wrangler was smoooth sailing to put on. Damn cherokees :cursing: .... Looks tough though I like it.
|
All times are GMT -5. The time now is 03:21 PM. |
© 2024 MH Sub I, LLC dba Internet Brands