Tomimal & Tanimal's- 1993 Cherokee Country Build Thread
#16
Newbie
Thread Starter
Join Date: Nov 2012
Location: Chicago, IL
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
Honestly I just search "Jeep Wrangler" or "Jeep" under "Auto-parts" on Craigslist. Just browse the listings for the day and see if anything catches my eye. Ad was just posted for the rock sliders but when I started talking with the guy it seemed he was just stripping the front and rear JCR bumpers off and Bushwacker fender flares. We would have taken all of it off his hands but the Bushwackers were for a 2 door
#18
Newbie
Thread Starter
Join Date: Nov 2012
Location: Chicago, IL
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
Got the front passenger floor in today:
Also got the rear passenger floor in:
Also had to cut another smaller hole next to the big one in the passenger side of the trunk:
Should have this trunk hole to fill as the next thing on the list.
Also got the rear passenger floor in:
Also had to cut another smaller hole next to the big one in the passenger side of the trunk:
Should have this trunk hole to fill as the next thing on the list.
Last edited by Tanimal; 03-25-2013 at 03:59 PM.
#19
Newbie
Thread Starter
Join Date: Nov 2012
Location: Chicago, IL
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
Got one of the bigger patches in the trunk welded in today:
Also cut out some more rust, passenger rear and that damn seat belt bolt is a T50 for reference! Had to torch the damn thing:
Still have a ton of patches to fill and the whole drivers side floors and rocker panel. We also have grinding to do, primer, and than some type of bedliner. We are leaning toward Rustoleum Bed Liner. Need to install front and rear bumpers, rocker armor, fix the drive shaft, fix the transfer case linkage, mount the beadlocks on the 33s and cut some of the fender back.
Also cut out some more rust, passenger rear and that damn seat belt bolt is a T50 for reference! Had to torch the damn thing:
Still have a ton of patches to fill and the whole drivers side floors and rocker panel. We also have grinding to do, primer, and than some type of bedliner. We are leaning toward Rustoleum Bed Liner. Need to install front and rear bumpers, rocker armor, fix the drive shaft, fix the transfer case linkage, mount the beadlocks on the 33s and cut some of the fender back.
#20
Newbie
Thread Starter
Join Date: Nov 2012
Location: Chicago, IL
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
To follow up that last picture posted here is that hole all filled (not very pretty but still needs to be grinded, also didn't snap the picture for awhile and it has surface rust):
Had to cut a rust hole out in the passenger rear fender:
Patched it up and grinded it down:
Beadlock rings will be getting some new paint soon (all stripped down):
Trunk right over the driver rear wheel:
Had to cut a rust hole out in the passenger rear fender:
Patched it up and grinded it down:
Beadlock rings will be getting some new paint soon (all stripped down):
Trunk right over the driver rear wheel:
Thread
Thread Starter
Forum
Replies
Last Post
investinwaffles
Modified XJ Cherokee Tech
11
05-18-2021 12:02 PM
Gtrsrlly
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
08-25-2015 11:50 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)