Setting up an 88 XJ - zXJ
#16
Member
Thread Starter
Join Date: Dec 2015
Location: Leland, NC
Posts: 167
Likes: 0
Received 1 Like
on
1 Post
Year: 1988
Model: Cherokee
Engine: 4.0l
Got a hand full of things coming on the 16th to finish some other pieces of this puzzle.
4wd.com says the wheels and tires should ship out on the 15th.
At some point I need to start building the front axle so I can have 4 wheel drive again, lol
Stay tuned.
4wd.com says the wheels and tires should ship out on the 15th.
At some point I need to start building the front axle so I can have 4 wheel drive again, lol
Stay tuned.
#21
Member
Thread Starter
Join Date: Dec 2015
Location: Leland, NC
Posts: 167
Likes: 0
Received 1 Like
on
1 Post
Year: 1988
Model: Cherokee
Engine: 4.0l
The firestik came in today, waiting on the rest of the pieces to finish the CB:
Finished up the bumper and winch install. Still want to get some door trim for the fenders and I'll pick up some d-rings and cube lights to add on there:
Finished up the bumper and winch install. Still want to get some door trim for the fenders and I'll pick up some d-rings and cube lights to add on there:
#26
Member
Thread Starter
Join Date: Dec 2015
Location: Leland, NC
Posts: 167
Likes: 0
Received 1 Like
on
1 Post
Year: 1988
Model: Cherokee
Engine: 4.0l
I just checked the status on 4wd.com and it looks like one wheel is back ordered. Everything is ready to rock otherwise, still says estimated ship date 12/15. I hope to have them on the Jeep soon.
Once I get the wheels and tires, I'll plan for bump stops. After those are done, SHOCKS and limit straps!!
Once I get the wheels and tires, I'll plan for bump stops. After those are done, SHOCKS and limit straps!!
#29
CF Veteran
#30
Member
Thread Starter
Join Date: Dec 2015
Location: Leland, NC
Posts: 167
Likes: 0
Received 1 Like
on
1 Post
Year: 1988
Model: Cherokee
Engine: 4.0l
Yeah I get the same feeling. This guy had them 3 years but bought them from a forum used himself I believe. They are solid. What I like most is the cutout for the pinch seam to slide down into the slider before it bolts to the pinch seam and the frame. I feel they'll do well, and it not.. I'll make them better with some help