The "Rollng Felony" story.......
Senior Member
Joined: Feb 2010
Posts: 507
Likes: 6
From: Richland Center, WI
Year: 1996
Model: Cherokee
Engine: 4.0
Drop it off..............
.....
I'd have more to show, but my sandblaster has the wrong grit in it, it's backed up like a 10 dolla hooker..........also managed to rip something connecting my arm to my sholder late Friday.........I've had to restrict some of my activities......I always knew my left hand was dumb, but really did'nt realize just how dumb until a day or so ago attempting to give the right arm a break...
It can't do anything right........
<<-------THIS ONE......it's disfuctional..........
.....I'd have more to show, but my sandblaster has the wrong grit in it, it's backed up like a 10 dolla hooker..........also managed to rip something connecting my arm to my sholder late Friday.........I've had to restrict some of my activities......I always knew my left hand was dumb, but really did'nt realize just how dumb until a day or so ago attempting to give the right arm a break...
It can't do anything right........
<<-------THIS ONE......it's disfuctional..........
Member
Joined: Dec 2010
Posts: 173
Likes: 0
From: New Jersey
Year: 2001
Model: Cherokee
Engine: 4.0 I6
Hey man, Just read through from page 1 to 32 and was fully entertained the whole time. I like your style man, you get things done and seem to have fun while doing it. I wish i was as talented as you are. The humor was great too! Best build thread I've read through so far. SUBSCRIBED! 
CF Veteran
Joined: May 2009
Posts: 1,844
Likes: 4
From: Glen Burnie, MD
Year: 1994
Model: Cherokee
Engine: 4.0 H.O. K&N, Borla headers, custom down pipe, magnaflow hi-flo cat, flowmaster to turn down tip
Line transfer/cut lines.........inorder to duplicate one side to the other for cutting......a template needed to be created...
.
From here, I transfered the shape of the flare to the template, at the aprox. correct height for cutting....
.
.
This template will serve itself well, I can now transfer it to the other side of the vehical for cutting, and it will also serve another purpose, yet to be discussed.......
.
'Til next time.............
.
From here, I transfered the shape of the flare to the template, at the aprox. correct height for cutting....
.
.
This template will serve itself well, I can now transfer it to the other side of the vehical for cutting, and it will also serve another purpose, yet to be discussed.......
.
'Til next time.............
what size tubing did you go with, DOM 2"x.120?
Seasoned Member
Joined: Oct 2011
Posts: 490
Likes: 0
From: Cumberland, Ohio
Year: 1998
Model: Cherokee
Engine: 4.0
Dude I must say you are a god, I just joined the forum and this was the first post I read and I read every single page. When this thread (if ever) is done you deserve a magazine, book, or hour long special on tv dedicated to this thread. You are absolutley hilarious and you know your *****! Your XJ is what XJ's like mine spank it to at night..truely amazing man.
CF Veteran
Joined: May 2009
Posts: 1,844
Likes: 4
From: Glen Burnie, MD
Year: 1994
Model: Cherokee
Engine: 4.0 H.O. K&N, Borla headers, custom down pipe, magnaflow hi-flo cat, flowmaster to turn down tip
Bushwacker states they are flexable and durable, but i touched one rock and those things care right off, bolts still in the fender! they are not good for armor, but work well on the street. i got them when i lived in cali, so the cops would leave me alone, but since i wheel this thing, i dont like them any more. i am gonna go the route that Detour is going
CF Veteran
Joined: May 2009
Posts: 1,844
Likes: 4
From: Glen Burnie, MD
Year: 1994
Model: Cherokee
Engine: 4.0 H.O. K&N, Borla headers, custom down pipe, magnaflow hi-flo cat, flowmaster to turn down tip
Newbie
Joined: Oct 2011
Posts: 26
Likes: 0
From: Virginia
Year: 1998
Model: Cherokee
Engine: 4.0 I6
yeah i noticed that after i had sent it. I'm wanting to do the same concept Detour is doing with his flares. But need a few pointers. I have a welder just how do you get the angles and turns on that pipe?
CF Veteran
Joined: Feb 2011
Posts: 2,763
Likes: 0
From: Apple Valley, MN
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0L
Originally Posted by 8robinson8
yeah i noticed that after i had sent it. I'm wanting to do the same concept Detour is doing with his flares. But need a few pointers. I have a welder just how do you get the angles and turns on that pipe?
CF Veteran
Joined: May 2009
Posts: 1,844
Likes: 4
From: Glen Burnie, MD
Year: 1994
Model: Cherokee
Engine: 4.0 H.O. K&N, Borla headers, custom down pipe, magnaflow hi-flo cat, flowmaster to turn down tip
CF Veteran
Joined: Feb 2011
Posts: 2,763
Likes: 0
From: Apple Valley, MN
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0L
Originally Posted by trans_am7935
no, u give them to bigfoot and tease him with a twinkie!
But in all seriousness: a pipe bender.
