Project XJ
11-16-2010, 02:28 PM
#17
Senior Member
Join Date: Mar 2009
Location: Grand Rapids, Michigan
Posts: 554
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee
Engine: 4.0
Yeah you should probably talk to the guys at pirate! Make sure you link the pirate4x4 build thread to this build thread!!!
GOOD LUCK!
haha
GOOD LUCK!
haha
11-16-2010, 02:31 PM
#18
Senior Member
Join Date: Feb 2010
Location: Alto, MI
Posts: 938
Likes: 0
Received 1 Like
on
1 Post
Year: 2002
Model: Grand Cherokee
Engine: 4.7
hahaha I'm 20 bro, not married yet. and my gf wouldn't go for you. I do want to see how you do on Pirate, so yeah, you better link it to here!
11-16-2010, 02:39 PM
#22
CF Veteran
This is completely ridiculous.
----
Positive criticism:
Rip the drivetrain(including engine) and fab up mounts, unibody stiffeners and other things to mount up the Axles and everything else.
Now you have Jap Scrap with everything under it as an XJ so it'll atleast be some what useful.
11-16-2010, 07:47 PM
#23
CF Veteran
Join Date: Nov 2010
Location: cape cod ma.
Posts: 1,140
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0 i6
can't be done and shouldn't be done are two different things, rejects put camaros on blazer chassis too if you wanna be F%#$ING logical and need more seats put another bench backward in the back of the XJ with some seatbelts BTW if you notice alot of the guys including myself on here are crafty with the torch but we tend not to **** into the wind like you are
11-16-2010, 08:03 PM
#24
CF Veteran
Join Date: Jul 2009
Location: New Jersey (Milltown, Lavallette, and Wayne)
Posts: 2,245
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0L I6
Cut the body off both of them. re-inforce/fully box the uni-body on the XJ. do the same for the odyssey. You guys obviously have never tried using cutting tools and/or a welder before. I pitty those who think the unibody can not be built.
Obviously I knew it had a uni-body. Did I ever once say I was going to unbolt the body? I plan on running a plasma cutter parrallel to the uni-body.
Looks like I will go to pirate 4x4... have fun with your cute little "budget boosts".... noobs
Obviously I knew it had a uni-body. Did I ever once say I was going to unbolt the body? I plan on running a plasma cutter parrallel to the uni-body.
Looks like I will go to pirate 4x4... have fun with your cute little "budget boosts".... noobs
Hahahaha the guys on pirate will rip it apart even worse lol good luck with that
11-16-2010, 08:24 PM
#25
Seasoned Member
Join Date: Aug 2010
Location: Galax Virginia
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
Well...... Ya know i have'nt been on here too long and am not sure if this type of thing happens often. But, if the OP is trying to be belittling and judgemental, as it seems to me.... Then, this just further proves my point that i have chosen the right forum. I see nothing wrong with outrageous, tricked out, sick***, built trail rigs. In fact, someday i may have my own. There are more than a few members on this forum with such. There is also nothing wrong with DD Jeeps.... The main reason i'm here is to be around good people who work together to help others enjoy their Jeeps, however they each so see fit. I am very happy to be among good people. To each his/her own Jeep!
Interesting thread tho.... Must be clown night on CF!
Interesting thread tho.... Must be clown night on CF!
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
02-15-2024 08:09 AM
Cane
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
23
12-11-2015 11:09 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)