Project wreck and rebuild
#1
Newbie
Thread Starter
Join Date: Aug 2012
Location: Ann Arbor, Michigan
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: Inline 6 cylinder 4.0L
Project wreck and rebuild
Attachment 162475
Nuff said?
Details after further investigation.
(Right side)
Bent sway bar mounts on axel.
Almost ripped off lower control arm and mount on axel.
Bent steering knuckle
Smashed fender
Smashed grill
Smashed lighted
Some scrapes and dents
(Left side)
Untouched
I removed the front axel and bought and used one then I ordered from rough country a 6.5" lift, a control arm drop kit and a rear shackle relocation kit with the new front spring spacers, yoke slip eliminator, and ordered 33" BF Goodrich mud terrain km2. While I waited for that to come in the mail I put all new ball joints, wheel bearings, CV joints in the new axel.
Took a while for me to get it all back together because of school and work but I got it all, and now im wheeling every sunday and loving when it rains and snows.
Nuff said?
Details after further investigation.
(Right side)
Bent sway bar mounts on axel.
Almost ripped off lower control arm and mount on axel.
Bent steering knuckle
Smashed fender
Smashed grill
Smashed lighted
Some scrapes and dents
(Left side)
Untouched
I removed the front axel and bought and used one then I ordered from rough country a 6.5" lift, a control arm drop kit and a rear shackle relocation kit with the new front spring spacers, yoke slip eliminator, and ordered 33" BF Goodrich mud terrain km2. While I waited for that to come in the mail I put all new ball joints, wheel bearings, CV joints in the new axel.
Took a while for me to get it all back together because of school and work but I got it all, and now im wheeling every sunday and loving when it rains and snows.
Last edited by Xj_Briggs88; 12-20-2012 at 10:56 PM.
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
02-15-2024 08:09 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)