How long is your track bar? I cannot get an aftermarket replacement, so i just decided i'ma make my own. But i need to know about how long to buy a piece of DOM so i can order it at work today and get it for the weekend!

Is your frame side mount the same as mine??

Just order a piece as long as your tie rod, I know its shorter than that. :)

did you try these guys for this one??

http://www.wildhorses4x4.com/product...ion_Parts_78yr

Sexton offroad in kamas may have one in stock...

If you measure how long you need I got an old one I made just needs heims. If its close to the length you need I'll sell it to ya.

That'd probably work. I'm not home to measure mine. If Derek is out and about maybe he'll stop and measure mine for ya.

Oh BTW, I am guessing "TIME OUT" is over Derek?? :laughing:

I could swing by on my way home and measure it if needed.



I can still log in on my phone lol

:pwned:

I havent heard of either place! Ill check em out! If neither is good, derek, im interested!

First of all, I just wanna say thank you for keeping me entertained for the past like 4 hours of my workday (yes, I just went through every page of the thread haha).

You got a sick *** rig man. I'm way jealous

It's been a lot of fun, and a lot of work! :)

And as boring as some build threads can be, i'm glad mine managed to keep you entertained. And thanks for the props :cheers:


Now somebody buy my beadlocks so I can build some 17" beads!

Dont forget my beads :)

I'm on it... :thumbsup:

Good man!

I did my first cut and fold Saturday!! :laughing: I figured everybody else had this in their build thread, I should too!! :cheers:

My buddy that cuts the beadlocks for me recently picked a project Cherokee up.. he needed some work done on it, and I need some new beads for my 17's. So we're doing a little trade work. :yes:

All in all, it was pretty much a piece of cake... tools used: Plasma cutter, 4-1/2" grinder, jack, some self tappers, a drill, and a BFH.

I cut and folded the rear quarter panels, cut the big lip off the rear wheel wells, then made a bunch of relief cuts and folded the rear lip up and in, then trimmed the front fenders, opened them up quite a bit o he can get some 33's under it.

Started about 7 am saturday and was done by 11. Not bad.

Finished project:
BEFORE...
Attachment 386205

AFTER...
Attachment 386206

Attachment 386207

Attachment 386208

Attachment 386209

Attachment 386210

Good job! Are you going to put something on the lip on the front fenders to keep from slicing the tires? Or is it just gonna be bumpstopped really well?

I'm not sure, you think i should warn him, or let him learn the hard way? :devil2: