Jeep Cherokee Forum

Jeep Cherokee Forum (https://www.cherokeeforum.com/)
-   Jeep Builds (https://www.cherokeeforum.com/f46/)
-   -   Project Ressurection (https://www.cherokeeforum.com/f46/project-ressurection-104131/)

sycoglitch 09-11-2011 12:20 AM

Project Ressurection
 
5 Attachment(s)
So i decided to start one of these build threads since my jeep got an unwanted facelift. Im pretty sure this thread name wasnt used, i searched, if it was please greats mods let me know.

Attachment 65554
Attachment 65555

Before the accident i was content with my jeep and did have future plans for her but did only minor mods due to funds and honestly i was happy with her.

Attachment 65557
Attachment 65558
Attachment 65559

Since this accident i am now bare on my front end i figured now is the time to go about my plans. although i have to wait for insurance etc etc, i already see that i want to go with a more usuable front and rear bumper and get rid of the stock fogs and go with hellas to help with clearance. i probably wont lift her this year but i do need new tires and with def go ahead with some BFG ATs.

sycoglitch 09-11-2011 12:24 AM

2 Attachment(s)
I did do some minor mods as stated above. first was my Hella Ecode H4 Conversions

Attachment 65560

Here is my before Silver stars

Attachment 65561

And then my after Hellas. im running these housings with some silver star ultra H4s and alone they were good but as with any XJ, upgrade your wiring harness. After the harness i love these housing. they did cost me a lil but if you dont want HIDs these are a good way to go. clean even light and itll get thrown all around ya

I dont have these pics on my pc right now so when i dissamble my front end, pics of that will come also, ill take pics of my HD wiring harness.

Any questions feel free to message me anytime

sycoglitch 09-11-2011 12:34 AM

1 Attachment(s)
One pic i forgot to add before is my girl in her current state

heres how she stands and i will keep track of what im gonna do and take pics of what ive done. hope yall enjoy

sycoglitch 09-11-2011 08:54 PM

3 Attachment(s)
Here are some lil mods to help keep things in place.

Attachment 65708
To help keep drinks from fallin over when tailgating and repairing

Attachment 65709
Attachment 65710
This helps keep my tools from flying around

I also have a flash light mount that i dont have a pic atm

sycoglitch 09-11-2011 08:59 PM

5 Attachment(s)
Heres the HD wiring harness. its from LMC truck. yes its for chevys etc but it works for our XJs.

Attachment 65715
Feed goes to battery

Attachment 65716
you can mount them or i keep them tucked away to stay dry

Attachment 65714
Attachment 65713
These are the connectors that go into your headlights.

Attachment 65717
And its easy to tie down the harness under your grill.

Some pics i didnt take were the ground for the bulbs and i put those right behind the bulbs to chassis and there is a connector on the harness that goes to the driver side headlight harness which turns the harness on when you turn the headlights on. this harness corrects the voltage drop and will make your headlights brighter

sycoglitch 09-15-2011 08:27 PM

5 Attachment(s)
Also redid my exhaust. Put a new walker dual cat a few months back and just recently redid my muffler back with a dynomax

Attachment 66212



Attachment 66213



Changed out my plugs a few weeks back



Attachment 66214



Attachment 66215

And finally here is my flashlight mount and GC shift handle.



Attachment 66216

I also have some decal that aren't in my phone that I need to take new pics of.


So this Is my girl right now for all of you to see. Next I wanna do my pads and rotors, map sensor and o2 sensor and need news tires too. I have big plans and, with bills, a small wallet but as I mod her up I'll post it here. Hopefully some of you can get some ideas along the way

sycoglitch 09-24-2011 07:01 PM

2 Attachment(s)
Replaced my MAP sensor tonight and installed some silver stat backup lightbulbs

Attachment 67547



Attachment 67548

Tomorrow I'm gonna install my replacement front end parts, take some pics and drink some beer if weather is permitting

sycoglitch 09-25-2011 03:56 PM

1 Attachment(s)
Here's a pic of my new rotors that were pit on the other day

Attachment 67670

sycoglitch 09-25-2011 04:01 PM

5 Attachment(s)
Today I did some body work and replaced my fender and header panel. Didn't feel like painting the panel so I'll take it apart another day to sand prime and paint. For now I'm happy she's whole again. Should be getting my custom rock crawler bumper next week, can't wait for that

Attachment 67671



Attachment 67673



Attachment 67674



Attachment 67672



Attachment 67675

sycoglitch 09-25-2011 04:02 PM

1 Attachment(s)
And here is where I'm at so far, just gotta aim my headlights tonight

Attachment 67676

sycoglitch 10-02-2011 07:50 PM

6 Attachment(s)
Put on some decals today, I like em alot and of course my girl things I'm Obsessed :thumbsup:



Attachment 68799



Attachment 68802



Attachment 68804



Attachment 68805



Attachment 68806



Attachment 68807

Attachment 68808



Attachment 68809

sycoglitch 10-09-2011 10:55 AM

4 Attachment(s)
Started taking my bumper apart the other day, didn't get to far with daylight against me, today I wanna try and get the rest off

Attachment 69955



Attachment 69956



Attachment 69957



Attachment 69958

96xjclassic 10-09-2011 06:45 PM

Looks real good bro, keep up the good work! Can't wait to see more.

sycoglitch 10-09-2011 07:20 PM

Thanks, I was hoping I would have more progress but my girl always want to spend time when she's not at work since she works 12 hr days. I took the fog light off before so it looks a lil normal lol and during the week I wanna relocate the horns and the vacuum canister so I can cut the fender lining next

96xjclassic 10-09-2011 07:26 PM


Originally Posted by sycoglitch (Post 1246849)
Thanks, I was hoping I would have more progress but my girl always want to spend time when she's not at work since she works 12 hr days. I took the fog light off before so it looks a lil normal lol and during the week I wanna relocate the horns and the vacuum canister so I can cut the fender lining next

We just did that on clowns today.


All times are GMT -5. The time now is 07:24 AM.


© 2024 MH Sub I, LLC dba Internet Brands