alloutperform

polished aluminium i had it leftover from a job i did last year found good use for it

mwdouglas

looks great gotta be better than the skid that's on mine its made of plastic(factory)

alloutperform

i'd be fine with that but you got a steel tank....if you look at my fab thread i did it cuz my 98 has a plastic tank

truckntractorhick

did u get that jeep cheap then since it was in an accident? and what lift is that?

alloutperform

i paid $300 for it and threw the kid $100 to leave the stereo in it....and the lift is a set of 6in tj springs i got on craigslist for $50 and a set of 1/2 chevy truck AALs gave me about 5in of lift

alloutperform

just a few wheeling pics::::





flexy:

alloutperform

by the way to any that have asked about these hankooks: they are f---ing sweet in the trails

alloutperform

well after the t-case drop i made i discovered i couldn't reach 4-lo so i tried to adjust..good f$#%ing luck it was siezed. so i just cut the slide off of the linkage punched the piece out of the slide block and welded in some threaded rod and set it up with nuts..its not much but i think it's better than the stock set up :

alloutperform

after some ill handling and poor ride i made the decision to biuld a longarm for the pickle i got a fab thread on the LA build but figured i should add some here...



flex before w/ STOCK LCA's:



underside:



crossmember:




arms:




done:


flexy test:






sitting outside: