Project Less is more 96 ZJ
#31
Seasoned Member
Thread Starter
Join Date: Oct 2010
Location: Jville, NC / Troy, NC
Posts: 458
Likes: 0
Received 4 Likes
on
3 Posts
Model: Grand Cherokee
Engine: 4.0
OK well today was very eventful caught my jeep on fire twice lol but everything is ok and nothing major was damaged but it was a learning experience. During the welding on the passenger side make sure the main harness is pulled away from the metal along with the plastic or is will catch fire ask me how I know that one lol.
A pillar 3/16th bracket welded in
B pillar bracket welded in
C pillar bracket welded in
A,B, and C brackets welded in
2x4 mocked in
2x4 mocked in
2X4 welded in and painted sorry for the ****ty pic
2x4 welded into the A pillar bracket
2x4 welded into the B pillar bracket
2x4 welded into the C pillar bracket
A pillar 3/16th bracket welded in
B pillar bracket welded in
C pillar bracket welded in
A,B, and C brackets welded in
2x4 mocked in
2x4 mocked in
2X4 welded in and painted sorry for the ****ty pic
2x4 welded into the A pillar bracket
2x4 welded into the B pillar bracket
2x4 welded into the C pillar bracket
#32
Seasoned Member
Thread Starter
Join Date: Oct 2010
Location: Jville, NC / Troy, NC
Posts: 458
Likes: 0
Received 4 Likes
on
3 Posts
Model: Grand Cherokee
Engine: 4.0
Well got it all finished up today still need to add the 2x2 kicker rails. I measured the lowest point on the drivers side rockers at 16 inches and the passenger side at 19 inches so a 3" total gain and 5" if I were to have had sliders mounted under the rockers. :cheers2:
I also still need to cap them so ill be doing that this week at some point
I also still need to cap them so ill be doing that this week at some point
#34
Seasoned Member
Thread Starter
Join Date: Oct 2010
Location: Jville, NC / Troy, NC
Posts: 458
Likes: 0
Received 4 Likes
on
3 Posts
Model: Grand Cherokee
Engine: 4.0
Thanks man it means a lot I really haven't done to much yet there is a lot yet to come here real soon feb 1st ill be ordering 35s then on the 15th or so ill be ordering IRO 5.5 kit and LA's and hopefully ill have time to gear my new axles and swap them in shortly after
#44
Wow man your zj is sick man .. Im waiting till after xmas to finally lift mine bc i kinda spent to much money on gifts this year but anyway i know who to contact if i have any questions