Project Frankenstein Jeep Jeep
#1
Senior Member
Thread Starter
Join Date: Aug 2009
Location: McCall Idaho!
Posts: 674
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Grand Cherokee
Engine: 5.2
Project Frankenstein Jeep Jeep
I Already have a build thread but i think i need to clean it up alittle soo restarting.... Anyways I have a 95 aqua jeep i want to go in a different way with this jeep fast but stable Widen the wheel base 1inch in back and 3/4 in front 2 inches of lift soo its not to top heavy with some 10.5s 30s.... On with the build so far.
DAY! ONE OF THE JEEP!
DAY! ONE OF THE JEEP!
#2
Senior Member
Thread Starter
Join Date: Aug 2009
Location: McCall Idaho!
Posts: 674
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Grand Cherokee
Engine: 5.2
First thing was to get rid of the horrible doors with duct tape XD
I replaced them with some rolled jeeps door panels.
I replaced them with some rolled jeeps door panels.
#3
Registered Users
Join Date: Dec 2009
Location: Everett, WA
Posts: 1,859
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0
let me get this right. you already have a build thread but you are starting another?
you want this to "go fast" like you say but you are going to lift it?
you want this to "go fast" like you say but you are going to lift it?
#4
Senior Member
Thread Starter
Join Date: Aug 2009
Location: McCall Idaho!
Posts: 674
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Grand Cherokee
Engine: 5.2
Then came the bad... Throw out bearing went out after i got stuck down a cat track trail XD lol soo had to replace that...