Project Desert Scorpion
I've had this Jeep for a few Years now and I figured I should start a build thread. I have an 88 Jeep Cherokee with a rebuilt AW4, a Dana 30 front and a Dana turdy-five rear. Probably one of the cleanest Cherokees that I've even seen when I got it but the PO cared more about the looks.
https://cimg1.ibsrv.net/gimg/www.che...b382a69e17.jpg My goal for this Jeep is to make it an Overland explorer type Jeep. I want it to be able to go where I want and have almost everything I need in order to be able to survive for a week or so. Some things that I want to do to it.... -One-ton axles -36's or bigger -32 gallon gas tank -Internal roll cage -Coil overs front and rear (May keep the leaf springs) -Front stinger bumper with a built in air tank -Rear tire carrier with built in drinking water tank -Full length and width roof rack with lights -Either a 4.6L stroker engine or turbocharged or supercharged engine -Lots of other little stuff! Ill try to update the thread as soon as I can but i am going to school. |
Very ambitious
|
Originally Posted by XJwonders
(Post 3225984)
Very ambitious
|
Update of progress so far!
Since I first got it I've done a few things to it...
-I put some boat exhaust vents and used them as hood vents -I did a put-it-together-yourself lift so to speak. Its a 3.5" lift, Rubicon Express Leaf springs, Pro-comp sway bar end links, home made extended and stronger lower control arms, 3.5" Rubicon express coils, extended brake lines, bilistein shocks front and rear for about a 5.5" lift to have extra down travel, SYE in the rear with a Adams drive shaft. -CB antenna with the mount on the roof in the gap between the body and the hatch -The 4.6L stroker motor that I just got running (Still needs injectors, a new exhaust system, and a better intake) -auxiliary fan with switch control and stock control unit -bigger transmission cooler -31" tires https://cimg8.ibsrv.net/gimg/www.che...14846ca009.jpg Best Picture i have at the moment of my hood vents. https://cimg0.ibsrv.net/gimg/www.che...df213f5966.jpg Right after the lift on stock tires... https://cimg8.ibsrv.net/gimg/www.che...6d49b6d7fc.jpg Best picture and most recent picture that I have of it flexing has the entire lift on it and the 31" tires and the sway bars are connected. Not a lot but its getting closer! |
All times are GMT -5. The time now is 11:09 PM. |
© 2024 MH Sub I, LLC dba Internet Brands