Project Death Wobble: 2000 XJ 5.3l Swap
03-17-2014, 05:55 PM
#18
Junior Member
Thread Starter
Join Date: May 2011
Location: By Detroit
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Progress has been slow due to the temps this winter. When the weather breaks, the exhaust manifolds will be welded up (with pics to follow). I will be headed to Moab at the end of April with some buddies, so there will be tons of motivation to get my rig done...
03-23-2014, 05:48 PM
#19
Junior Member
Thread Starter
Join Date: May 2011
Location: By Detroit
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
The exhaust manifold are underway...
The Harbor Freight notcher had to be extended at the top to allow the bigger pipe to fit. (If you want to see any pictures of the notcher mod let me know.) After that it was smooth sailing drilling the runner holes in the log. Lenox hole saws are amazing!
They match up nicely.
The Harbor Freight notcher had to be extended at the top to allow the bigger pipe to fit. (If you want to see any pictures of the notcher mod let me know.) After that it was smooth sailing drilling the runner holes in the log. Lenox hole saws are amazing!
They match up nicely.
Thread
Thread Starter
Forum
Replies
Last Post
Azzy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-08-2015 10:49 PM
Cherokee_Mike
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
09-05-2015 09:28 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)