Project DD til i break it
#16
CF Veteran
#17
CF Veteran
Join Date: Jan 2012
Location: Ocean County, NJ
Posts: 2,208
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L
Didn't you mention that the lift kit ISN'T a long arm? Because looking at your pictures, that actually IS a long arm Skyjacker kit. I know this because I'm running the same kit but mines been changed around a bit because the track bar setup was garbage. Post up more pictures of it
#18
Seasoned Member
Join Date: Oct 2015
Location: Fargo, ND
Posts: 305
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0L I6
Bed lined the sides of it and the wheel wells.
Want to do a cut and fold on the real quarter panels cuz I found some really bad rot on one side when I took the Rear bumper caps off.
Any ideas are welcome. I've never welded but I work in a sheet metal shop so
I was thinking about cutting all the rot out and fabricating a piece to seal up the area and maybe rivet it on or learn how to weld
Want to do a cut and fold on the real quarter panels cuz I found some really bad rot on one side when I took the Rear bumper caps off.
Any ideas are welcome. I've never welded but I work in a sheet metal shop so
I was thinking about cutting all the rot out and fabricating a piece to seal up the area and maybe rivet it on or learn how to weld
Thread
Thread Starter
Forum
Replies
Last Post
josephcecil1978@gmail.com
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
03-31-2016 05:04 AM
Tucker
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
08-17-2009 03:38 PM
Arab1970
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
04-24-2008 05:03 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)