Project B.H.V. (OS III)
#32
THE Admin
Thread Starter
Join Date: Sep 2010
Location: Lantana, Fl
Posts: 34,036
Received 231 Likes
on
187 Posts
Year: 1996
Model: Cherokee (XJ)
Engine: 4.Slow
Thanks. Just incase im gonna take the head off of it and clean the block out, install new valve seals and put a whole new Felpro gasket set in it
#35
THE Admin
Thread Starter
Join Date: Sep 2010
Location: Lantana, Fl
Posts: 34,036
Received 231 Likes
on
187 Posts
Year: 1996
Model: Cherokee (XJ)
Engine: 4.Slow
Just got all my engine parts back from machine shop and assembled. .040 bore, new pistons, port n polished head, .020 shaved off head. Three angle valve job as well. Neighbors think I have a V6 swap in it. Lol
Also picked up a spare transmission
Also picked up a spare transmission
The following users liked this post:
Carlos Manuel Davis (06-06-2020)
#42
THE Admin
Thread Starter
Join Date: Sep 2010
Location: Lantana, Fl
Posts: 34,036
Received 231 Likes
on
187 Posts
Year: 1996
Model: Cherokee (XJ)
Engine: 4.Slow
:facepalm: lmao. Yes boys n girls the dreaded manifold crack can even happen to 4cys as well. Was letting the motor idle some more to break in when I heard a metal pop sound followed by the sound of exhaust leak. Yup, she cracked right between cyl 2&3 at the collector. Just gonna take her off and weld her up tomorrow untill I can get a chance to pick up my header and muffler.
Last edited by Outlaw Star; 11-07-2014 at 06:38 PM.
#43
THE Admin
Thread Starter
Join Date: Sep 2010
Location: Lantana, Fl
Posts: 34,036
Received 231 Likes
on
187 Posts
Year: 1996
Model: Cherokee (XJ)
Engine: 4.Slow
Little progress. First off, my blower motor and windshield wipers weren't working due to bad switches. Good thing I still got my Xj to rob parts from.
Second thing I got a chance to get a new muffler. Went with a stainless Magnaflow unit. Sounds good. Not loud and not whisper quiet either.
Third, got my manifold welded back up.
Second thing I got a chance to get a new muffler. Went with a stainless Magnaflow unit. Sounds good. Not loud and not whisper quiet either.
Third, got my manifold welded back up.
The following users liked this post:
Carlos Manuel Davis (06-06-2020)
#45
THE Admin
Thread Starter
Join Date: Sep 2010
Location: Lantana, Fl
Posts: 34,036
Received 231 Likes
on
187 Posts
Year: 1996
Model: Cherokee (XJ)
Engine: 4.Slow
Alright, little update. Screw the 4 banger, I've now got a Chevy 350 to drop in. (Quote Tim Allen "More Power!") Advance Adapters makes a bell housing kit to bolt to my AX-15 and a set of motor mounts. With Jeep Beach 2015 around the corner I'm hoping to have it in, tuned and lift installed.
Last edited by Outlaw Star; 11-16-2014 at 06:12 PM.