Project Alaska xj
#166
Member
Thread Starter
Join Date: Oct 2016
Location: Alaska
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 2.5l with performance ignition and 4 port injectors
very tedious lol... I had a 231 with sye all ready to slap in it, but had to sell it cause I needed some cash.. regretting it now lol. I’ll get it pulled apart here soon
#167
Yea mine is working without a SYE just fine but I kind of kick myself in the *** for not just putting one in anyhow for the sake of knowing. Then again that would have cost me another $200+ for the kit so I guess when I need it I will do it.
#168
Member
Thread Starter
Join Date: Oct 2016
Location: Alaska
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 2.5l with performance ignition and 4 port injectors
Hopefully will be sitting on the mud tires i picked up for it tomorrow. Depending on how busy i am at work that is. We’ll see what happens
#171
Member
Thread Starter
Join Date: Oct 2016
Location: Alaska
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 2.5l with performance ignition and 4 port injectors
#172
#173
CF Veteran
Can't see anything. I had to try 3 different ways to upload wheeling pics from this past weekend on my build thread. I'm blaming the website
#174
Senior Member
Join Date: May 2015
Location: Louisville KY
Posts: 736
Likes: 0
Received 4 Likes
on
4 Posts
Year: 01
Model: Cherokee
Well after a lil work looking into things, found out that it’s some slack in the tcase chain that’s causing the noise that I’m hearing. So on to the next piece of the Jeep that needs rebuilding. In the process of figuring that all out, went out and enjoyed some sunshine
#175
Really good looking build man. Could you describe the sound coming from your T case? I’m having some Sounds coming from mine too. It sounds like a slight grind, kinda like a brake dragging, but it’s not the brakes. I’m wondering if I’ve got some slack issues on my chain too
I know when mine was toast it was making popping noises when I put load on it such as trying to climb something. Normal driving I couldn't tell anything was wrong with it. 4wd low it was terrible but part time only when I put strain on it.
#176
Member
Thread Starter
Join Date: Oct 2016
Location: Alaska
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 2.5l with performance ignition and 4 port injectors
Really good looking build man. Could you describe the sound coming from your T case? I’m having some Sounds coming from mine too. It sounds like a slight grind, kinda like a brake dragging, but it’s not the brakes. I’m wondering if I’ve got some slack issues on my chain too
#177
Member
Thread Starter
Join Date: Oct 2016
Location: Alaska
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 2.5l with performance ignition and 4 port injectors
#178
Member
Thread Starter
Join Date: Oct 2016
Location: Alaska
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 2.5l with performance ignition and 4 port injectors
I’d say these new Bilsteins made a difference... will be setup for about 4” up and 12” or so down. Shocks aren’t maxed out yet in the pic either lol. Also picked up a factory swing gate I’m gonna try and make work for my uses on this build
#179
Member
Thread Starter
Join Date: Oct 2016
Location: Alaska
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 2.5l with performance ignition and 4 port injectors
Finally had a nice enough day on a day off to drive around in the Jeep. Definitly enjoying driving it again lol. Planning a trip out around the 12th, assuming I can find a trailer. Fingers crossed