Project Alaska xj
#106
Member
Thread Starter
Join Date: Oct 2016
Location: Alaska
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 2.5l with performance ignition and 4 port injectors
been awhile, but got the ball joints done finally, new axle shaft and fixed all the damage from the last trip out. Still got a few things to do, but should be ready for a mid-month run to the glacier now that everything’s frozen up
#108
Member
Thread Starter
Join Date: Oct 2016
Location: Alaska
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 2.5l with performance ignition and 4 port injectors
Sure half tons sounded cool at the beginning of this year, but these one tons sounded better... also snagged a complete 99 4.0 harness and computer to swap out the 2.5l when the time comes.. big big plans for this lil Jeep
#109
Member
Thread Starter
Join Date: Oct 2016
Location: Alaska
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 2.5l with performance ignition and 4 port injectors
#110
Member
Thread Starter
Join Date: Oct 2016
Location: Alaska
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 2.5l with performance ignition and 4 port injectors
Been making some pretty solid work on the one tons. My goal is to have em in around March to kick off the summer wheeling season. Also plan on picking up the motor today for the stroker build as well as getting rid of the 2.5l
#111
CF Veteran
Lol what is going on with your factory upper arms still hanging in place and your lower arm brackets still attached? Nice looking build otherwise.
#112
Member
Thread Starter
Join Date: Oct 2016
Location: Alaska
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 2.5l with performance ignition and 4 port injectors
been meaning to remove them lol... broken hand the last 2 months has kinda prevented a lot of things from happening lol. I’ll get around to it eventually, I hope anyway it needs to be done lol
#113
Member
Thread Starter
Join Date: Oct 2016
Location: Alaska
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 2.5l with performance ignition and 4 port injectors
Well picked up a few goodies to start the stroker build for the swap.. gotta love having good hookups in the Jeep world haha
#114
Member
Thread Starter
Join Date: Oct 2016
Location: Alaska
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 2.5l with performance ignition and 4 port injectors
Got the axles all ready for brackets. Hopefully gonna order the new gun for my Lincoln and some leaf perches and burn those in, gonna try and get down to one of our local Off-road shops and price out an artec truss for the front through them. Should have the housings ready pretty soon, then just need to order gears, install kits, wheels, and some 40s
#115
Member
Thread Starter
Join Date: Oct 2016
Location: Alaska
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 2.5l with performance ignition and 4 port injectors
Well after a year of being on long arms, I finally managed enough time to cut out the factory control arm brackets. They’ve been bumping my arms for awhile, but nothing’s holding back up travel now other than my fenders. Time to bumpstop!
#117
Member
Thread Starter
Join Date: Oct 2016
Location: Alaska
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 2.5l with performance ignition and 4 port injectors
#119
Member
Thread Starter
Join Date: Oct 2016
Location: Alaska
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 2.5l with performance ignition and 4 port injectors
Picked up a set of wheels for the tons today. Leaf perches are on the way for the rear, just need to order rebuild kits, gears and lockers, the 40s, and the artec truss for the front and she’ll be ready to wheel again. May rock the roller for a bit until I get the tires the jeep will be sitting on
#120
Member
Thread Starter
Join Date: Oct 2016
Location: Alaska
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 2.5l with performance ignition and 4 port injectors
Rolled the rear up under the Jeep to get some measurements for perch locations.. all I’m gonna say is I can’t wait lol. Should have the weight on the rear this week or next, all depends on when the perches show up