new to jeeps
i have a 2000 xj i bought for my son who has it in arizona i am going to buy him lift kit tires etc. i was wondering what axles are on it?
|
Assuming its 4x4 Dana 30 Front .....If it has ABS then it has a Dana 35 rear No ABS then it has a Chrysler 8.25 29 spline good luck with the Cherokee
|
PS you can find all the info about these in the Cherokee Tech section.....Which is were you should have posted this question, you would have like 20 replies there already ...no biggie though welcome to the forum :icon_cheesygrin:
|
Yep that's pretty much it lol You can go 33" on stock axles and be aight. But watch out for gearing.
|
thank for the quick replys guys my son dont know what he is looking at im 1500 miles away
|
NP. Welcome to the forum from TN!!!
Normally you can get pretty fast responses on here it's a great site I love it!!! |
Dose he know how to tell if it has ABS .........(Not by slamming on the brakes i mean)
|
Originally Posted by mitchell205
(Post 481729)
Dose he know how to tell if it has ABS .........(Not by slamming on the brakes i mean)
lol Brakes suck |
he says he can see alight on the dash but it does not come on when turning on ignition switch
|
Its a Dana 35 then good luck with the build keep us posted check out my build link below
|
ok the ABS is not a sure fire way to ID your rear....i have 2 non-ABS cherokees with the D35....
http://i655.photobucket.com/albums/u.../JeepDiffs.jpg the D35 is more round, while the C8.25 has a flat spot on the bottom....also notice the rolled lip on the C8.25.....hope this helps |
All times are GMT -5. The time now is 03:50 PM. |
© 2024 MH Sub I, LLC dba Internet Brands