My xj build in progress
#1
Newbie
Thread Starter
Join Date: Jan 2011
Location: Weimar ca
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0l
My xj build in progress
Hey guys so first off this is my first post on the site and just became a member..so i figured i better tell you guys about my xj and what im doin to build it up...well it all started about a month ago when i picked up a stock 88 xj with cracked tires, a weird sound from the motor, and the interior was completely gutted. Well about the second day i got it it started spewing coolant out of the waterpump and realized the noise was a bad pump so i replaced that and schmobbed it around for a while stock. Then i put coil spacers and shackles on it and cut the fenders....after a couple weeks i bought a 4.5 inch rustys lift and some 33/12.50/r15's... next came some rock lights, bed lined the inside, seat covers, and other little things. I dont have the stock pictures but this is how she sits now:
My future plans are:
roof rack with high lift
rock sliders
control arm drop
8.8 rear axle dana44 front
fabbed front and rear bumpers
If youv'e got any suggestions let me know! thnx
My future plans are:
roof rack with high lift
rock sliders
control arm drop
8.8 rear axle dana44 front
fabbed front and rear bumpers
If youv'e got any suggestions let me know! thnx
#5
Newbie
Thread Starter
Join Date: Jan 2011
Location: Weimar ca
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0l
hey guys just thougt id add a little update...i went ahead and traded my 3.5 inch rough country coils for a set of 4.5" rubicon express grand country coils and i have to say it rides way better
#7
Newbie
Thread Starter
Join Date: Jan 2011
Location: Weimar ca
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0l
Trending Topics
#10
Newbie
Thread Starter
Join Date: Jan 2011
Location: Weimar ca
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0l
Hey guys just thought id post another update which im pretty stoked about... i went down to my local jeep dismantler called J&W jeep and found a commanche out there with this control arm drop kit on it and only paid $50 bucks! not sure what brand they are or they could be even homemade but i also need some instructions on how to put these bad boys on it looks kinda confusing...sorry for the small picture but here they are:
#11
Newbie
Thread Starter
Join Date: Jan 2011
Location: Weimar ca
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0l
FINALLY!!!! i got my control arm drop brackets on it took forever lining up the axle by myself...well took it out for a test drive and couldnt be more satisfied and also it flexes a hell of alot better too. Its so nice not being able to feel every god damn bump in the road haha but ya heres some pics of her:
heres how she sits on 5.5" of lift on 33's
and some flex pics with the drop brackets...its not all the way flexed out yet cuz i still have to get new brake lines
heres how she sits on 5.5" of lift on 33's
and some flex pics with the drop brackets...its not all the way flexed out yet cuz i still have to get new brake lines
#12
Newbie
Thread Starter
Join Date: Jan 2011
Location: Weimar ca
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0l
well since no one else is replying to my post i thought id post some pics....i went to fordyce yesterday which is a pretty intense jeep trail in northern california......heres some pics
The trail entrance
and heres driveline hill it was pretty gnarly
The trail entrance
and heres driveline hill it was pretty gnarly
#14
Senior Member
Join Date: Dec 2010
Location: San Diego
Posts: 686
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0L inline 6
Hey guys so first off this is my first post on the site and just became a member..so i figured i better tell you guys about my xj and what im doin to build it up...well it all started about a month ago when i picked up a stock 88 xj with cracked tires, a weird sound from the motor, and the interior was completely gutted. Well about the second day i got it it started spewing coolant out of the waterpump and realized the noise was a bad pump so i replaced that and schmobbed it around for a while stock. Then i put coil spacers and shackles on it and cut the fenders....after a couple weeks i bought a 4.5 inch rustys lift and some 33/12.50/r15's... next came some rock lights, bed lined the inside, seat covers, and other little things. I dont have the stock pictures but this is how she sits now:
Attachment 35199
Attachment 35200
Attachment 35202
Attachment 35203
My future plans are:
roof rack with high lift
rock sliders
control arm drop
8.8 rear axle dana44 front
fabbed front and rear bumpers
If youv'e got any suggestions let me know! thnx
Attachment 35199
Attachment 35200
Attachment 35202
Attachment 35203
My future plans are:
roof rack with high lift
rock sliders
control arm drop
8.8 rear axle dana44 front
fabbed front and rear bumpers
If youv'e got any suggestions let me know! thnx
#15
Newbie
Thread Starter
Join Date: Jan 2011
Location: Weimar ca
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0l