My White 01 XJ
#1
Junior Member
Thread Starter
Join Date: Apr 2012
Location: San Jose, Ca
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
My White 01 XJ Build
Well I finally pulled the trigger a couple months back to lift my 01 that I bought back in 08. Here are a couple before and after shots. Did a RC 3 inch lift with aal kit and new lower control arms. Went with Mickey Thompson 15x7 Sidebiters and Goodyear Duratracs 31x10.50 R15's. Still got some stuff to add on, but one step at a time.
After Lift
After Lift
Last edited by Dubnali; 08-13-2012 at 06:34 PM.
#2
Junior Member
Thread Starter
Join Date: Apr 2012
Location: San Jose, Ca
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
This is what me and my buddy tackled last weekend. Installing a set of the Bushwacker Flat fenders. Talk about alot of trimming and cutting. But I'm way happy with the results.
Next up will be the install of my JCR Bumpers and rocksliders. Just got them back from powder coating.
Getting started and removed stock flare.
All done cutting and painting the edges and inner fender with some undercoating.
Installing brackets and flare.
And here are the remaining install pics.
Here are a few of the back, was getting dark so I couldn't take all the pics I would've liked to.
And here is the finished pics.
Let me know what you guys think.
Next up will be the install of my JCR Bumpers and rocksliders. Just got them back from powder coating.
Getting started and removed stock flare.
All done cutting and painting the edges and inner fender with some undercoating.
Installing brackets and flare.
And here are the remaining install pics.
Here are a few of the back, was getting dark so I couldn't take all the pics I would've liked to.
And here is the finished pics.
Let me know what you guys think.
#3
CF Veteran
Join Date: Jul 2012
Location: Hudson, FL
Posts: 3,683
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L Inline 6
Same tires as mine What size? – I have 33s.
You did a clean job on the flares. If I end up doing third party flares, I might do the cut outs by Bushwacker instead.
You did a clean job on the flares. If I end up doing third party flares, I might do the cut outs by Bushwacker instead.
#4
Junior Member
Thread Starter
Join Date: Apr 2012
Location: San Jose, Ca
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
I just went with 31's for now, but after cutting the fenders I'm pretty sure I can fit a 33 in there.
Thanks, took forever to get done as both my buddy and I are very picky about our work so we took our time and made sure it all came together right. I am very pleased with the outcome for sure.
Yeah I like these flares way better than the other flares out there, gives it a modern day look. The other flares look dated IMO. These are expensive, but well worth it once they are on the Jeep.
Thanks, took forever to get done as both my buddy and I are very picky about our work so we took our time and made sure it all came together right. I am very pleased with the outcome for sure.
Yeah I like these flares way better than the other flares out there, gives it a modern day look. The other flares look dated IMO. These are expensive, but well worth it once they are on the Jeep.
#5
Junior Member
Thread Starter
Join Date: Apr 2012
Location: San Jose, Ca
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Here's a crappy cell phone pic of my jeep after I had installed the front bumper and lights. Oh and the roof rack. I will try and snap some better pics tomorrow since I installed my JCR sliders last night. It's coming together, now it's time to go test it out.
#6
Junior Member
Thread Starter
Join Date: Apr 2012
Location: San Jose, Ca
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Thread
Thread Starter
Forum
Replies
Last Post
jmsummers2012
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
53
04-30-2021 02:35 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)