It is my favorite of the available factory ones, seems the only problem is you have to do the Hack n Tap instead of a SYE kit which sucks, but living in snow country I love my 4WD Part Time, wouldn't give it up. I have never had an issue with one even wheeling the crap out of my old Jeep with 35's and the 242.
|
Originally Posted by Dino's 99XJ
(Post 2239282)
It is my favorite of the available factory ones, seems the only problem is you have to do the Hack n Tap instead of a SYE kit which sucks, but living in snow country I love my 4WD Part Time, wouldn't give it up. I have never had an issue with one even wheeling the crap out of my old Jeep with 35's and the 242.
|
4 Attachment(s)
Ok so i finally got warm enough weather to repair her!
Attachment 168759 I started by taking off my grill. Just need a phillips screw driver. Easy enough! Attachment 168760 Took the metal cover across the radiator off, it put up a fight all the bolts rusted up from years of heat and yuck. Got it out of the way and got the cooling clamps on so i didnt lose any antifreeze. Attachment 168761 Such wonderful yard ordaments! :) Attachment 168762 Swapping everything over from the old radiator to the other! |
I dropped my front skid plate to replace my crank shaft position sensor. I must say rustys offroad builds some tough skidplates!!!! I bought their engine/trans skid, 1" drop cross member, and the t case skid and i used the crap out odd them last trail run and i didn't even scratch the powder coating!!!!!
|
1 Attachment(s)
Ok been waiting for this to come in. Strangely all my local autopart stores had gauges but they didn't have sending units included. Why awesome gauge? Because race Jeep. Lol
|
2 Attachment(s)
Installing the transmission cooler today. Pretty straight forward really.
|
2 Attachment(s)
Got some more nice weather, Missouri is sure being generous this winter..... Anyways! Got the sending unit hooked up and wired in, some pictures of the gauge where it will be going. I ran out of spade connectors i am 1 short!! And also i will be using 3m adhesive tape to mount the pod
|
1 Attachment(s)
Haha its true
|
1 Attachment(s)
|
Originally Posted by CherokeeSailor
(Post 2295768)
yeah, take THAT |
1 Attachment(s)
The new Cherokee. The professor says it all...
|
1 Attachment(s)
So while my real Jeep is out being repaired I decided to wheel my little Jeep.....at work lol
|
Are you part of the Zombie Response Group? Nice Wagoneer, not many of them around.
|
What!? There is such a thing? :0 Thank you waggoneers are just sexy lol
|
I love your build! Makes me want a waggy
|
All times are GMT -5. The time now is 05:16 AM. |
© 2024 MH Sub I, LLC dba Internet Brands