|
My First Jeep
I bought my first jeep in march of this year. It was a bone stock 92 cherokee laredo with running boards(shutter). First thing i did was get some steel wheels and 31x10.5x15 bfg at and pull off those god awful running boards. Then picked up a 3.5" RE super flex kit and put that in. Bought a roof basket and then after driving it for a couple months made a stainless TC drop and put that in this week. Also have a 8k winch waiting for the nates bumper to arrive and bought some dana 44 axles today. Future mods planned are get the rear dana 44 in and possibly the front, a couple more inches of lift, 33's and most likely front and rear lockers as well as some sliders and skids.
here are a couple crappy cell phone pics stock with the 31's http://img.photobucket.com/albums/v7...0312-00097.jpg a little test flex after the lift was installed http://img.photobucket.com/albums/v7...0317-00103.jpg TC drop http://img.photobucket.com/albums/v7...0731-00282.jpg how she currently sits http://img.photobucket.com/albums/v7...0802-00283.jpg |
Nice looking jeep. Nice rack too. haha
|
I did my wheels the same way. I bedlined them and then left the caps silver.
|
|
Looks good man. I wish I had the heart to drop $500 on BWs
|
Originally Posted by chadh92
(Post 1143696)
Looks good man. I wish I had the heart to drop $500 on BWs
Good looking Jeep btw, I wish I had the time and money to get all that stuff for my '98....but alas, being a High School student has it's downfalls |
Originally Posted by chadh92
(Post 1143696)
Looks good man. I wish I had the heart to drop $500 on BWs
had to cover the new tires with something and didn't want to use lawn edging. lol |
copied from another forum so don't mind the dates in my post.
Haven't got too much done lately. Fixed an overheating problem and installed a new rad, thermostat and a couple hoses. installed a 1000cfm electric fan to aid in cooling when not moving too much. Did get the winch installed and it works great. Ordered some parts and am awaiting a few more before the install of them all. Waiting on RE adjustable upper and lower control arms(should be here on tuesday). Have RC control arm drop brackets and shackle relocation brackets sitting here waiting on the arms. Also have all new extended stainless lines to go in when i boost it another 1.5"-2". Picked up a parts xj for some goodies http://img.photobucket.com/albums/v7...0915-00368.jpg ford 8.8 with 4.10's and a lsd. and rebuilt this yesterday to go with the RE sye. http://img.photobucket.com/albums/v7...0915-00370.jpg work was done http://img.photobucket.com/albums/v7...p/DSC_0233.jpg out with the old http://img.photobucket.com/albums/v7...p/DSC_0235.jpg new going in http://img.photobucket.com/albums/v7...p/DSC_0234.jpg new shiny bits waiting to see some use http://img.photobucket.com/albums/v7...p/DSC_0237.jpg Both axles are in. Sye is installed. Shackle relocation brackets are in and jeep is holding it's own weight again. Just need to bleed the brakes, hook up e-brake cables, disable abs light, sort out sway bar and links, and modify the hitch to work with the relocation brackets. Then to get an alignment and I should be good to go. Will try and get pics tomorrow. Sitting a fair bit higher now too. well measured it today and it's about 7" of lift. a bit more than i wanted. i was hoping for around 5.5". the shackle relocation brackets were touted to give 1.5" of lift but they give at least 3". look how much lower the shackle mounts now. oh well might have to step up to 35's now ::). just gotta get the e-brakes hooked up and some new shocks and should be ready to roll. will try and get better pics in the light tomorrow http://img.photobucket.com/albums/v7...p/DSC_0265.jpg http://img.photobucket.com/albums/v7...p/DSC_0266.jpg http://img.photobucket.com/albums/v7...p/DSC_0267.jpg http://img.photobucket.com/albums/v7...p/DSC_0268.jpg http://img.photobucket.com/albums/v7...p/DSC_0269.jpg |
| All times are GMT -5. The time now is 05:13 PM. |
© 2024 MH Sub I, LLC dba Internet Brands