mud hoe
5 Attachment(s)
so i bought this for $350 dollars, beat to hell 200k miles 4.0 jeep XJ 1995
theres a lot of work needed to be done to it. broke engine mount, clutch fan, radiator, a ***** load of rust. Attachment 27223 Blacked out my taillights Attachment 27224 installed off-road lights and posed near another jeep Attachment 27227 poor farm road in Vermont, Attachment 27225 sinkin in some water Attachment 27226 give me your worst and best i am 16 been spendin a lot of time with it, i have fixed all the other issues but the rust, its an on goin battle, oh and i broke my engine mounts AGAIN. i am workin on a custom fab bumper for her. but tell me what you think |
You got a great deal for 350.00, and I see your not afraid to wheel it too.
|
did you get any water in the back?
|
Originally Posted by mpars
(Post 695043)
did you get any water in the back?
|
yea it needs work but a good deal,
oh yea a lot of water i her, that was after working myself out, it was deeper:brows: |
Check that Mud Hoe out!
|
little lift and a set of generic 31in mud tires ur set, dont forget for the front towpoint and to make it solid it will be tugged on eventually
|
Originally Posted by xj1996
(Post 695771)
little lift and a set of generic 31in mud tires ur set, dont forget for the front towpoint and to make it solid it will be tugged on eventually
the custom bumper with be 1/4 steel with side D hooks and a stinger. i hope theat will hold good:sailor: |
2 Attachment(s)
|
Keep at it on the rust! i would look at the Brown Dog motor mounts too. They will solve your problem once and for all.
http://browndogindustries.com/ Great build! |
Originally Posted by 96_xj
(Post 696820)
Keep at it on the rust! i would look at the Brown Dog motor mounts too. They will solve your problem once and for all.
http://browndogindustries.com/ Great build! |
damn some of the worst rust ive seen. i dont want to find rust :(
|
Originally Posted by clockwise
(Post 697596)
damn some of the worst rust ive seen. i dont want to find rust :(
|
Originally Posted by wheeler
(Post 697916)
im in denial, so i don't look hahaha
|
i almost have it all cut out for the plate now but i am going through cutting wheels like nothing with all of that,
i am also redoing the frame rails soon which will be hard to do since the gas tank fill hose is right there:confused1: |
All times are GMT -5. The time now is 01:59 PM. |
© 2024 MH Sub I, LLC dba Internet Brands