MSJeeps911 Crazy Build Thread
 

Hey guys. Well to start of with I own 2 jeeps. So this build is for my ZJ. I no longer own and XJ.. But the XJ donated to the ZJ so it worked out.
I have owned the ZJ for 4yrs and my dad had it for some time b4 that. I got it when I turned 17 but it died and I parked and left it untill now.
The ZJ has 270k on it so heres my build.

http://i838.photobucket.com/albums/z...Photo-1736.jpg
The zj when I moved it from the back to the front to start http://i838.photobucket.com/albums/z...Photo-1938.jpg

http://i838.photobucket.com/albums/z...3-30102747.jpg
The trans is out.
http://i838.photobucket.com/albums/z...30113417-1.jpg
Its on ground. Took me only a few hours to do this.

http://i838.photobucket.com/albums/z...5-02074402.jpg
My trans time to rebuild.

Then found this trans. A rock krawler built. Came out of a 96 zj with an 8in lift and long arms. Has 30k on it. Picked up dirt cheap and funny thing was I had to pull this one too. http://i838.photobucket.com/albums/z...4-05081150.jpg


Trans is in its new home. My jeep.
http://i838.photobucket.com/albums/z...5-11114035.jpg

Time for the good stuff. Well I was gonna do a 3.5in lift but said f*** it go big of go home. So I used my dads old MJ v6 4in lift coils along with a 1.75 spacer to get around 5+in of lift.But before that had some work to still do.

Found some 30x9.50 tires and rims couldnt beat the price 50 bucks all 4. In ok con. Little worn but good for now. While it sits longer my orignial canyons were beat and the tires were shot and all flat.
http://i838.photobucket.com/albums/z...7-22222408.jpg
http://i838.photobucket.com/albums/z...7-26180448.jpgHow it looks.

Now time for the lift.

The coils. Eww dirty
http://i838.photobucket.com/albums/z...7-28193830.jpg
http://i838.photobucket.com/albums/z...7-28193857.jpg

I like red so Im gonna make this all red.

http://i838.photobucket.com/albums/z...7-28194410.jpg
Cleaned up the rust and then painted. BTW this is an xj front axle with 740 U joints.
http://i838.photobucket.com/albums/z...7-28204117.jpg
http://i838.photobucket.com/albums/z...7-28185843.jpg
Pro comp shocks. ES3000S
http://i838.photobucket.com/albums/z...7-29161333.jpg
Then with the lift and spacers on.
http://i838.photobucket.com/albums/z...7-30071400.jpg

http://i838.photobucket.com/albums/z...8-01195024.jpg
Rear axle is on the ground. Its all cleaned and painted now. Coils will be in soon. Im doing the F>R swap if I cant get the lift I want I have my old xj 3in lift coils that will go there instead. I have a .75in spacer going in the back as well.
http://i838.photobucket.com/albums/z...8-01170133.jpgFront coils painted red too.



Some adj control arms and a trac bar.
They were painted red. Im gonna repaint them picked them up 120..
http://i838.photobucket.com/albums/z...6-10202148.jpg
__________________

Just to see how high the zj is compared to the WJ. The back of the zj is level on jack stands in the back. so heres a pic. Wj has a 2.25 spacer and UC. With 31s

http://i838.photobucket.com/albums/z...8-02195228.jpg



http://i838.photobucket.com/albums/z...8-02174424.jpg

Thats the V8 F>R swap__________________

Just ordered a rear JKS adjust trac bar. Hopefully can get the RE rebuild kit for my rear ca asap.

Sweet build man. I wish I had the knowledge, time, and ability to do larger projects like transmission swaps. Unfortunately, it's my only car -___-. Eventually the day will come where I do need to swap the transmission and I'll dread it haha. Following this topic!

oohohohho i want more picis ! :D really nice build

Thanks guys. It was sitting for 2yrs b4 I touched it. I will swap a 4bt in and a manual when I.have more money and am a full time mech... Finish school too..

Just now. After work

http://i838.photobucket.com/albums/z...8-05161408.jpg
Picked up undercoat.

http://i838.photobucket.com/albums/z...8-05162113.jpg

Also got rear shocks on and bolted everything up. I think ill put my stickers on the rear shocks. Just puttung tires on and gotta find something to do with my swat bar.

http://i838.photobucket.com/albums/z...8-05164121.jpg


Its kinda done. Just painting trac bar stuff again for front and need to wait for rear trac bar.


I think im gonna order a 1in spacer for the rear eventually but when I do ill need brake line drop. My rear is at 22 5/8 which makes it 3.75in (was hoping for 4.25 to make jeep level) and my front is 23 13/16 which makes it 5.5in. Maybe little more or lesa but thats about right for it.

http://i838.photobucket.com/albums/z...8-05164655.jpg

Before and after. Iro trac bar braket.
http://i838.photobucket.com/albums/z...8-05165425.jpg

I think it looks better. I dont need this to be perfect.

My gf said the.back looks yo low. Shes gonna get me some 4.5 coils for the rear. I think im gonna have her get me Iro.

Trac bar came in today.

http://i838.photobucket.com/albums/z...09192612-1.jpg


http://i838.photobucket.com/albums/z...8-10184228.jpg



This jks bar is amazing. Im tempted to get one for front but they dont offer it with a bolt hole on each end.to.be used with.the.strong bracket.

Just removed front trac bar and bracket. Took off as one. Also for.anyone doing this. Soak in PB much easier. Lucky.only.prob I had was bolt on axle other than that all was good.

The builds looking good.