Mexico bound JEEP project
#31
Seasoned Member
Thread Starter
Join Date: May 2010
Location: NW Montana
Posts: 361
Likes: 0
Received 0 Likes
on
0 Posts
Year: 88
Model: Cherokee
Engine: 4.0
UPDATE- well the Jeep has been neglected for a couple weeks now. I got it all back together and the tranny won't shift into any gear. After talking to numerous people I think the TC came loose of the pump.. soo now I have to pull it back out and see what the deal is.. siiiiiggghhh...
#32
Seasoned Member
Thread Starter
Join Date: May 2010
Location: NW Montana
Posts: 361
Likes: 0
Received 0 Likes
on
0 Posts
Year: 88
Model: Cherokee
Engine: 4.0
Buuut after I get that worked out my next project is to swap the lift out of my parts jeep over, install the front doors with new pins, and then re-gear the front... the rear 8.8 is in the shop getting re-gearded and locked..
#33
Seasoned Member
Thread Starter
Join Date: May 2010
Location: NW Montana
Posts: 361
Likes: 0
Received 0 Likes
on
0 Posts
Year: 88
Model: Cherokee
Engine: 4.0
Update- well this project is going much slower then I would like but here is what I have been doing. Both axles have been re-geared to 4:56 and aussie locked. The rear 8.8 is still waiting to be installed as well as the 3" skyjacker lift. I got my wheels powdercoated and new hankook mt tires installed. Both diffs received covers courtesy of roughstuff specialties. I had some time yesterday so I put the new headliner fdabric in. It was my first time doing it so it's not perfect but way better then before.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)