Little Blue Jeep build: Abridged.
52 Attachment(s)
Update: 5/16/16; All relevant build updates up until 6/6/16 are in this first post. Any after 6/6/16 will be continued on page 2 and forward. Thanks!
So this is the first Jeep I've actually built myself, I haven't exactly documented the entire thing so this is more of what I've done/plan to do with some pictures! From now on the more I do I'll be more detailed with photos and add as I go. Here is what I started with, purchased in July 2014 from second owner(?) for $1500 1989 Cherokee Pioneer 158k BA 10/5 1" Coil spacers Bastard pack/AAL :dunno: (PO was unsure) 31x10.50x15r mix match. All manual options :thumbsup: Picture was taken around November 2014 Attachment 311382 Left her like that for a long time with plans in the back of my head but being 22, working a part time job at minimum wage and paying student loans and an apartment simple upkeep was the main focus. February 2015: I moved to South Carolina for a job as a lab tech at a plant that manufactures HDPE fittings for gas and water lines. Attachment 311383 Now September, I started ordering parts for her. First I purchased IRO 4" coils, fixed UCAs and LCAs, double shear adjustable track bar, HD tie rod, 1" T-case drop, shocks. Attachment 311384 I didn't order rear leaves because I was hoping the 4" front would level me out with the rear (picture to come). If you've been following the news in October 2015 SC was hit by Joaquin and many areas flooded and a lot of people lost their homes and businesses. Unfortunately I lost my house due to flood waters (my house is also a beach house on stilts and it was completely under) so I moved in with my Aunt. Every one has was of coping so I started throwing money at my Jeep haha. Ordered some new wheels and went home and test fitted them when they came in. Attachment 311385 Before: Attachment 311386 During: Attachment 311387 Attachment 311388 (Aunt came outside, didn't know I was doing it that day lol) After: Attachment 311389 I immediately ordered rear shackles and some much needed sway bar links. Attachment 311390 After installing those I had to save up a little more money to buy some much needed tires, so here's my dog, Fred. Attachment 311391 And theeeeeeeeeeeeen: Attachment 311392 I stuck with 31x10.50s because, well they were available and I needed tires like really soon. They are Goodyear Wrangler Authorities and so far I'm pretty happy with them. Then I got my wheels and new tires mounted and this is how she sat the day after. Attachment 311393 Attachment 311394 Added a new sticker to remind these South Carolinians that I'm VA proud :D Attachment 311395 12/9/15 was my birthday and I turned 23, when I got home there were two boxes on my aunts porch for me. My mom ordered me a steering box brace, spacer and some extended stainless brake lines (still waiting on the brake lines). Happy birthday to me! Thanks mom! Attachment 311396 This past weekend 12/12/15 I got a wild hair up my *** and decided to remove my body trim and bedline the rockers and rear quarters and put my new bumper on (shown in last picture) while I was house sitting for my boss. Still not sure if I like the bumper or not but I went heavy on clear coat to prevent rusting and kept the raw metal look to somewhat match the rear chrome bumper. Before: Attachment 311397 During: Attachment 311398 And after: Attachment 311399 Attachment 311400 As of today 12/14/15 that's how she sits. I really don't have a set in stone plan for this because I'm always changing my mind, but the only thing that is set is once I buy another daily I'll start beating on her, right now I guess it's just prep for that. Eventually I'll get rid of the T-case drop and do an SYE, I just don't need it now. I want to swap out the BA 10/5 and attempt the 6 speed swap. Go larger on the tires once these wear out. So I think for now I'm going to focus on the interior, which is in great shape. I just don't know how to not mess with things. The steering brace, spacer, along with a Durango gear box, a new pump and pulley will be going in over my vacation from work during Christmas break so I'll add some more pictures and what not once I do that. If anyone has any comments, questions, pointers or CONSTRUCTIVE criticism feel free to do so. Thanks guys! Current: 4" IRO coil springs IRO double shear adjustable track bar IRO HD Tie Rod IRO Shocks IRO T-case drop Rough Country 2" drop shackles Rough Country quick disconnects Dirtbound Offroad Stubby Recovery bumper American Racing Outlaw 1's 15x10 -38 offset 31x10.50x15 Goodyear Wrangler Authority Waiting to go on: M.O.R.E Steering box brace RE stainless braided brake lines Durango gear box PS Pump & pulley. Update: 12/21/15 Added some LED cluster lights this weekend Before: Attachment 311401 After: Attachment 311402 Also found a wood grain dash trim at the junkyard so I pulled that and installed it. Attachment 311403 Update: 1/6/16 Went up to VA for vacation to visit my mom and some friends between Christmas and New Years. While I was up there I installed the Durango box, no pictures though because I had some time constraints. While I was up there the slave decided to go. Now, I have never pulled a transmission by myself and neither had my friend Mike so we decided to jump in head first and just go to town(everyone starts somewhere). Attachment 311404 Yeah, maybe we shouldn't have done that because we fought the trans the whole time. Once it was out Mike (right) wanted to take a obligatory douchebag victory picture, I was completely okay with it. Attachment 311405 I would've done the AX15 swap but I couldn't locate one near by and it was nearing the end of my vacation so the BA 10/5 had to go back in. Luckily I've found a external slave AX15 that needs new synchros near me in SC that I will probably pick up this weekend and start getting that whole swap ready so I don't have to deal with the internal slave again.:brickwall: Almost immediately after we bled the clutch and did a short test drive I went somewhat Roadkill style and took her on a 2.5 hour trip to the Outer Banks and hit the beach with some friends. Here are two of the pictures, I will post more as they are given to me :thumbup: Attachment 311406 Attachment 311407 Update: 1/11/16 Well, last night I went ahead and picked this up........ Attachment 311408 Compared to what I had been finding these for WITHOUT the transfer case, I had to jump on this. I need to convert it to an external slave set up but I'm in no real rush. While they're both out I'm going to take the time to open them up and see if anything looks fishy and at the very least put new synchros in the transmission. I've also been thinking about building a np231/np231 doubler while it's out to? Thoughts on that anyone? Feel free to chime in. Also before I picked that up I installed my other G.E.A.R seat cover, forgive the dark pic. Attachment 311409 And on my way to pick up that trans and t-case I saw this old building and saw a photo opportunity! http://i1382.photobucket.com/albums/...psmugviehi.jpg Update: 4/25/16 With my work load increasing heavily I haven't had much time to work on the XJ. Well, this weekend I finally had a day off to get some work done. So I pulled the t-case and Trans. Got the front end apart, and fixed my fenders from when I cut them. Attachment 311410 Attachment 311411 Attachment 311412 Attachment 311413 Update: 5/02/16 Both axles are now "out." The D35 is just kind of chilling in the rear so HOA doesn't notice its on stands :euro: This weekend, (May 7th) I'm going back up to VA to pick up a D30 with a Lock-Rite and a 29 Spline 8.25 with an Aussie from a buddy who rolled his XJ. After that and some new bushings I'll be ready to finally get the motor out and into the garage. Attachment 311414 Update: 5/09/16 Loaded up the 30 and 35 with 3.07s to trade and scooted my way on up to Virginia. Attachment 311415 While I was there Starr Motors hosted their annual off-road day. I didn't wheel the zj but here are a few pictures. My buddy also let me break in his new xj for him since he was wheeling his zj. His new xj; 32s, stock suspension, no sway bars, 4.10s and a lock-rite. Attachment 311416 My Zj + the only other one of the same color Attachment 311417 Axle pulling day, axles came from the crushed white xj. Attachment 311418 And after spending the day with my mom for mothers day I headed back to SC with a D30 with a Lock-rite and an 8.25 with an Aussie ready to go in. Both with 3.55s. He also let me snag the front clip, for a facelift swap. Attachment 311419 Update: 5/16/16 This past weekend I got the 30 and 8.25 installed along with test fitting the facelift. She's back on all fours again. Attachment 311420 Attachment 311421 Attachment 311422 Attachment 311423 Attachment 311424 Update: 5/31/16 Memorial day weekend I decided to final pull the engine and remove the head. First time I ever pulled an engine by myself so a few times I did get ahead of myself. Also, I was expecting a lot more sludge under the valve cover but to my surprise there wasn't hardly any. Sorry, It's kind of dark in my garage. Attachment 311425 Attachment 311426 Attachment 311427 Attachment 311428 Attachment 311429 Attachment 311430 Update: 6/6/16 Haven't been doing a ton because it's been hotter than hell here in SC but I pulled the pan and checked out the rod bearings. Here's #2. Attachment 311431 Attachment 311432 Attachment 311433 |
Sounds nice, but pics no worky.
|
Originally Posted by jay_sco
(Post 3186346)
Sounds nice, but pics no worky.
|
what new bumper did u get? front or rear?
|
Originally Posted by XJBARTZ90
(Post 3186673)
what new bumper did u get? front or rear?
|
Originally Posted by xjkj92
(Post 3186678)
Sorry, it's the front and it's shown in the last picture.
oh u got a stubby bumper? I seen u had a front hitch before. |
Originally Posted by XJBARTZ90
(Post 3186693)
oh u got a stubby bumper? I seen u had a front hitch before.
|
3 Attachment(s)
Added some LED cluster lights this weekend
Before: Attachment 311366 After: Attachment 311367 Also found a wood grain dash trim at the junkyard so I pulled that and installed it. Attachment 311368 |
4 Attachment(s)
Went up to VA for vacation to visit my mom and some friends between Christmas and New Years. While I was up there I installed the Durango box, no pictures though because I had some time constraints. While I was up there the slave decided to go. Now, I have never pulled a transmission by myself and neither had my friend Mike so we decided to jump in head first and just go to town(everyone starts somewhere).
Attachment 311091 Yeah, maybe we shouldn't have done that because we fought the trans the whole time. Once it was out Mike (right) wanted to take a obligatory douchebag victory picture, I was completely okay with it. Attachment 311092 I would've done the AX15 swap but I couldn't locate one near by and it was nearing the end of my vacation so the BA 10/5 had to go back in. Luckily I've found a external slave AX15 that needs new synchros near me in SC that I will probably pick up this weekend and start getting that whole swap ready so I don't have to deal with the internal slave again.:brickwall: Almost immediately after we bled the clutch and did a short test drive I went somewhat Roadkill style and took her on a 2.5 hour trip to the Outer Banks and hit the beach with some friends. Here are two of the pictures, I will post more as they are given to me :thumbup: Attachment 311093 Attachment 311094 |
Lookin good. Word of advice, get rid of that transfer case drop before it causes you more problems down the road
|
Originally Posted by 93_xjcherokee
(Post 3194579)
Lookin good. Word of advice, get rid of that transfer case drop before it causes you more problems down the road
|
18 Attachment(s)
New Years OBX trip; picture heavy!
Attachment 311019 Attachment 311020 Attachment 311021 Attachment 311022 Attachment 311023 Attachment 311024 Attachment 311025 Attachment 311026 Attachment 311027 Attachment 311028 Attachment 311029 Attachment 311030 Attachment 311031 Attachment 311032 Attachment 311033 Attachment 311034 http://i1382.photobucket.com/albums/...psguklsl6h.jpg Attachment 311035 Attachment 311036 |
awesome photos
|
Those are some sharp pics. Looks like you're having lots of fun with the XJ so far, keep it up.
|
3 Attachment(s)
Well, last night I went ahead and picked this up........
Attachment 310964 Compared to what I had been finding these for WITHOUT the transfer case, I had to jump on this. I need to convert it to an external slave set up but I'm in no real rush. While they're both out I'm going to take the time to open them up and see if anything looks fishy and at the very least put new synchros in the transmission. I've also been thinking about building a np231/np231 doubler while it's out to? Thoughts on that anyone? Feel free to chime in. Also before I picked that up I installed my other G.E.A.R seat cover, forgive the dark pic. Attachment 310965 And on my way to pick up that trans and t-case I saw this old building and saw a photo opportunity! Attachment 310966 |
All times are GMT -5. The time now is 02:54 AM. |
© 2024 MH Sub I, LLC dba Internet Brands