Ktmracer v3 underway, 97 2 door xj build (FULL UPDATE ON PAGE 3)
03-13-2012, 05:36 PM
#47
so far its been alright.
i adjusted my driving style accordingly.
It makes wheeling most obstacles easier, but when i do come to an undercut or need to use some throttle, i'm a little more conservative with the throttle than i used to be.
so far on 38's i spit out a couple u joint caps on one side.
but on 35's and 36's in the past i stripped a ring and pinion, broke a detroit, bent a knuckle, broke about a dozen shafts, some alloy, some chromo, some stock, and a couple hubs.
03-13-2012, 07:57 PM
#48
FORGOT ABOUT MY TRACKBAR!
7/8" heims
pretty sure its 1.75 x .25" dom tubing
custom trackbar brackets on each end.
full droop (holy moly i used to leak fluids)
next to my old tnt customs bar
frame mount. (frame has since been plated on the outside and underneath the rails)
7/8" heims
pretty sure its 1.75 x .25" dom tubing
custom trackbar brackets on each end.
full droop (holy moly i used to leak fluids)
next to my old tnt customs bar
frame mount. (frame has since been plated on the outside and underneath the rails)
Last edited by ktmracer419; 03-13-2012 at 08:41 PM.
04-08-2012, 09:26 PM
#51
Thread
Thread Starter
Forum
Replies
Last Post
John T
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
02-19-2022 11:27 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)