just stick the jack under the breaker bar
 

I got a fresh start with a new to me 2 door 94 cherokee after my 99 kicked the can and it was cheaper to just part the old one out and start anew. i was wrong.

https://sphotos-b.xx.fbcdn.net/hphot...65656004_o.jpg
heres my 99 along side my buddy's 01

she who started exactly once after this picture was taken:brickwall:

here is the new one i picked up and stared to work on just last week
http://i221.photobucket.com/albums/d...ps302e7736.jpg

taking the old suspension out i realized i might be over my head. the rust is so bad... i have no floors and this was my favorite part.
Attachment 353977

thats the old leaf spring rusted in half...I DROVE 40 MILES ON THAT!

swapped both front and rear axles and pit the 3in rustys lift under her in a couple days it was a good time to go a bit higher so i threw pucks and shackles under there too

some pics of that...
Attachment 353978
Attachment 353979

done now ill put a pic up later.
but the rust is really bad worst i have ever seen shy of being rusted in half.
some quality time with the MIG will hopefully fix that.

i need steel. is anyone a clevelander who knows where i can get a bit? i dont want to order online. shipping costs are too high

Attachment 161510


Ok bled brakes annd blaah blaah blah. Found some metal and started cutting up the floor


Attachment 161509

Nice Jeep and thread title name lol

it is a trick that has worked many more times than i thought it would, also i had to do that to every bolt in the rear suspension. none broke!

i started welding 1/8in steel plate into the back of the jeep with my trusty stick welder because it had served me well in more heavy duty applications... DO NOT USE A STICK WELDER TO WELD FLOORS IN. on the lowest setting it wanted to eat thru the "frame".
i did what i could to tack them in for now but im gonna need to dig out a MIG from somewhere

got the MIG and more metal to weld in floors
also decided to reinforce rear bumper because it is an important recovery point and i ripped out all the welded nuts pulling my brother out of a ditch
a little fab with 1/4 in steel plate is a bit overkill but t will not brake this time

Attachment 353500

this is what I have made up. the blue part runs down the frame and bolts run thru to the other side where there is another bracket.

red arrow is plate that has holes for the bumper bolts to go thru

budget mods
 

ran out of money to do floors and felt unproductive
budget mod time:
1: amocan center console
2: amocan speaker box
Attachment 353262
3: home brew tcase drop
4: bump stop drop
5: shelving system for cargo area made outa wood
6: electric fan manual switch
7: install a secondory battery that i have layin around(on one of the shelves i just made)
8: secondary electric fan to replace clutch fan
9: attempted to turn my ac compressor into an air compressor(working out kinks)

Compound rack

Attachment 163879



Attachment 163878



Attachment 163877



Attachment 163876



Attachment 163875

*restart*

...ok so i had a kid(her name is claire) and broke my Cherokee in half("frame" crack and a big one)... unrelated events. so i needed one i felt would be safe to haul the kid around in. so i paid 3 grand for a super clean 98 clasic four door. came with three inch blocks and pucks... blah.

Subbed the title got my attention. Know all too well about the kids killing the account. Good luck on your new build!

SO after 10 hours of cursing Chrysler engineers, sweating and spitting. this rolled out of a warehouse in cleveland.

Attachment 322539

yay! spring swap and shackles. and, for the first time ever, i didnt break any bolts!

when people ask me why i do the things i do to my cherokee, i show them what a stock suspension looks like.
Attachment 322538

it is really just a station wagon with 4wd

I have been lazy.
Made fender flairs

Attachment 248471

Took off those rust generators on the rear qp

Attachment 248472

Cut off the stinger and am still thinking about the best way to mount the rear shocks. Bolts broke. suprise surprise