Its A Jeep Thing
#61
Junior Member
Thread Starter
Join Date: May 2011
Location: my house
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0 L
not to much done today. fixed a few things i found wrong after the trail run.. break line got hit by the tire when it was flexing bent it so i made it not hit anymore. loose U bolts, leaky break lines. also when the tires goes up into the fender the inner is got a ridge and its cutting my front tires so i fixed that.
than i tried it in the back yard after
before
after
and i know how people like to see other peoples welds..this is when i did my bumper
than i tried it in the back yard after
before
after
and i know how people like to see other peoples welds..this is when i did my bumper
Last edited by jeep boy; 07-11-2012 at 08:00 PM.
#62
Junior Member
Thread Starter
Join Date: May 2011
Location: my house
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0 L
well been along time since i have posted. since i last posted nothing has changed but its just gettin wheeled. last time out was frog stompers toy run for the children, 80 trucks register was a great day. i always got stain cause my buddys dd\wheeler had more dents then my wheeler.. well...took him for a ride
and the carnage.. after a day of spinnin tires, bouncing off trees it let go.. first went the axle shaft then that... well u know how it goes.
left it up there over night when i went and got new ball joints
got it home..
0 -,m
and the carnage.. after a day of spinnin tires, bouncing off trees it let go.. first went the axle shaft then that... well u know how it goes.
left it up there over night when i went and got new ball joints
got it home..
0 -,m
#63
Junior Member
Thread Starter
Join Date: May 2011
Location: my house
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0 L
PLANS....
before it can be taken out again its getting a nother make over..
weld in rocker rock sliders, tie that into the unibody that will have the uni body strangthing kit, then its gonna get a simple exo cage and maybe 1 tons... see how money is at the time, long arms will come soon and maybe link the rear to. also thinking of turboing the 4.0
flame on!!
before it can be taken out again its getting a nother make over..
weld in rocker rock sliders, tie that into the unibody that will have the uni body strangthing kit, then its gonna get a simple exo cage and maybe 1 tons... see how money is at the time, long arms will come soon and maybe link the rear to. also thinking of turboing the 4.0
flame on!!
#64
Junior Member
Thread Starter
Join Date: May 2011
Location: my house
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0 L
wow this is old, forgot i even had this build here... Well i did a buncha stuff and things to the jeep took it in a comp and its been sitting ever since then.. I have now moved to alberta and jeep is still back in bc so next spring ill go get it and maybe start the buiild again?????
here is where it left off.
beat on it a bit
tore the door open
broke many more axle shafts, Flexed it
limiting chains
i built a cage but i dont have any finished pics of it.
put it on its lid bout 4 hours after i finished the cage
tried finishing the comp but ripped my trac bar out and broke a cv shaft. its been sitting ever since.. bout a year and a half now
in the mean time iv been building this
here is where it left off.
beat on it a bit
tore the door open
broke many more axle shafts, Flexed it
limiting chains
i built a cage but i dont have any finished pics of it.
put it on its lid bout 4 hours after i finished the cage
tried finishing the comp but ripped my trac bar out and broke a cv shaft. its been sitting ever since.. bout a year and a half now
in the mean time iv been building this
Thread
Thread Starter
Forum
Replies
Last Post
schaferjeep
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
5
08-21-2015 08:40 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)