Gunnar's 99 2dr build!!
#16
Junior Member
Thread Starter
Join Date: May 2011
Location: Athens
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Thanks a lot! Im addicted to them now!
I talked myself out of buying the lift now, and decided to go with the original plan of mid july. Its so hard to wait but i dont need to keep throwing so much money into this thing all at once! Im going to Mexico in july and the day I get back the lift is getting ordered, and thats the end of it!
My leaf springs right now are almost completely flat and look like they want to start arching the wrong way...how dangerous is that? Should I hold off on driving it until I get my new leafs?
#17
Junior Member
Thread Starter
Join Date: May 2011
Location: Athens
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
oooops...
Well i couldnt stand it. I went ahead and ordered my lift from Jason at Rough Country!!!! He was helpful and got the kit shipped to me for a good price!!
Went with the 4.5 X-series with the control arm drop kit, and the 2.2 shock upgrade. Im soo excited i can hardly stand it. I am going to wait til july however (at least what im telling myself now) to order my wheels and tires.
Ive been looking at where to order my SYE and drive shaft and have semi-decided on ballistic jeep. Anyone have any other recommendations?
Went with the 4.5 X-series with the control arm drop kit, and the 2.2 shock upgrade. Im soo excited i can hardly stand it. I am going to wait til july however (at least what im telling myself now) to order my wheels and tires.
Ive been looking at where to order my SYE and drive shaft and have semi-decided on ballistic jeep. Anyone have any other recommendations?
#18
Junior Member
Thread Starter
Join Date: May 2011
Location: Athens
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
LIFT DONE!!
The lift is finally done! It is much taller than I anticipated but i LOVE it!!
Specs
4.5in Rough Country X-series
1.75in rustys spacer
Control arm drop brackets
shackle relocation brackets
greasable lift shackles
2.2 shocks
Im getting some serious vibes right now. SYE and shaft are on the way though!!
Specs
4.5in Rough Country X-series
1.75in rustys spacer
Control arm drop brackets
shackle relocation brackets
greasable lift shackles
2.2 shocks
Im getting some serious vibes right now. SYE and shaft are on the way though!!
#22
Junior Member
Thread Starter
Join Date: May 2011
Location: Athens
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
much obliged! Im really happy with how it turned out!
Ive spent wayyyyy too much money on this thing!!
The SYE should be here today and the shaft should be here monday-tuesday. After that, I have to take it slow with this thing. I still want a few little things like tinted front windows, subs, rear bumper, etc... But I NEED some gears!
Im gonna slap in this SYE as fast as possible. Im soooo ready to test this thing out!
#24
Senior Member
Join Date: Dec 2010
Location: Southern Utah
Posts: 797
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 I-6
The SYE should be here today and the shaft should be here monday-tuesday. After that, I have to take it slow with this thing. I still want a few little things like tinted front windows, subs, rear bumper, etc... But I NEED some gears!
Im gonna slap in this SYE as fast as possible. Im soooo ready to test this thing out!
Im gonna slap in this SYE as fast as possible. Im soooo ready to test this thing out!
#25
Junior Member
Thread Starter
Join Date: May 2011
Location: Athens
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
went with ballisticjeep. $375 shipped for SYE and shaft with lifetime warranty seemed the best route to go.
got a quick question though. how bad of an angle is this on the pitman arm??
got a quick question though. how bad of an angle is this on the pitman arm??
#26
CF Veteran
Join Date: Jul 2009
Location: New Jersey (Milltown, Lavallette, and Wayne)
Posts: 2,245
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0L I6
It's not terrible but you would see some kind of improvement in the steering with a dropped pitman arm. You can use a pitman arm off of a ZJ for about a one inch drop. Cheap easy fix.
#29
Junior Member
Thread Starter
Join Date: May 2011
Location: Athens
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Thanks man! I really appreciate it
Thanks for the info. Ill probably leave it be for now. The far future plans involve removing the front spacer, long arms, and cutting enough for 35's....but that is at least a year away.
They are 33/12.50/15 Mickey Thompson TTC radials. and Thanks for the compliment!! and BTW, sig will be updated soon!!
Make a build thread when you start! Good luck with the install. Thanks for the kind words!!
Make a build thread when you start! Good luck with the install. Thanks for the kind words!!
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)