Goose Jeep
 

well ive been through about 12 jeeps in the last few monthes mostly because i sell vehicles for a living but i got a good daily grand cherokee and i have time for another cherokee of my own now here we go

2 inch wheel spacers, paint hood, spray bedliner on sides and in back took out seats, cragrs soft 8s, lower control arms from rural king 30$ apeice, tint taillights , tinted windows 5%, new lift kit, painted hood and a little custom paint on the back i got the idea from another guy on here

heres how she sits, now gotta throw the lift on, i already got the soft 8s muddy with my other cherokee but i think its startin to look good

picked up some rock sliders at a junkyard 75 bucks, new radio from walmrt and finally startin the lift

Looks good man!

thanks wiggles its my favorite out of all of them, picked up a new one today for 2000$ 167k clean and runs great, also going 703 injector swap and throttlebody spacer on the goose

Don't do the tb spacer, they are a waste on our engine beside some sound. But otherwise the new one looks good

really? i also ordered a stage one programmer chip, not sure what it will do but it should be here any day

Lol, chips and spacers don't do that much for our 4.0. They put out about all they can unless you open it up and start boring stuff

how about the injector swap?

Yes that is actually a good thing to do

picked up a front clip from a junkyard,25 bucks, it had some damage so i patched it up and put it on for a quick look, now i just need lights and sand it down primer and paint

after hours of drilling and cursing the sliders are ready to be bolted in place, they will be up a bit more and i will repaint them

3 inches in the front, clip primered, got 4 33 inch super swampers, need to to rear lift and waiting on 3 inch coil spacers and i will shackle and block the back for a total of 6 inch lift

Its coming along good i remember putting my JCR stage 3 rock sliders on what a pain couldnt get them to bolt so i welded them on :yes: