function over fashion
#17
to finish the fuel pump install rather than run the wires with the factory ones I just used a trailer light to make the computer think that there was still a fuel pump , the light drops 12v when light lights up and that tells the computer to fire the injectors because there is fuel pressure now
#22
Junior Member
Join Date: Jul 2015
Location: Florida
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0L HO
dude i love stuff like your build i have a friend that has a samuri we work on and it has a boat gas tank in the passenger seat and a honda civic driver seat that isnt bolted in but its the funniest thing ive ever ridden in. SUBBED!
#25
The factory fuel pump harness has 3 wires one is 12v with key it only stays on for a second unless your cranking it will remain on
One is ground and one is for the fuel level sending unit , I chose to run the 12v and the sending unit wire together so I can see that the pump is on from the dash ,the pump is freaking loud anyways but at the time the jeep had absolutely no exhaust so I didn't hear it as much
One is ground and one is for the fuel level sending unit , I chose to run the 12v and the sending unit wire together so I can see that the pump is on from the dash ,the pump is freaking loud anyways but at the time the jeep had absolutely no exhaust so I didn't hear it as much
#26
Front drive shaft started clicking , pinion bearings shot , pulled the diff cover off to see that someone had added oil to my mud compartment
I guess that's what you get for buying a jeep that's been wheeled before
I guess that's what you get for buying a jeep that's been wheeled before
#30
Got a few things done in the last few weeks
Made some tie rods for the hydro assist steering and the grand Cherokee knuckle swap
1/2" wall tubing is some heavy duty stuff
Got a new junk yard axle to truss and lock
Made some tie rods for the hydro assist steering and the grand Cherokee knuckle swap
1/2" wall tubing is some heavy duty stuff
Got a new junk yard axle to truss and lock