Subscribed so I can actually read this later instead of just looking at pics

The rear suspension is a modified RK coil conversion...and the front is 100% custom one off that i built for this XJ...I CAD every day using Solidworks...so i used it to my advantage when building the exact hybrid cross member i needed to work with the suspension pickup points, for my ride height, as well as clear the Atlas with out any issues...All the front arms are built from 2" - .250" wall DOM...the rears are all solid stock 1018...

The Ruffstuff stiffeners are great; I didn't have any issues with them. Like anything with an xj, you have to have patience when installing them and try not to half ***** them when your working with them...takes a little persuasion to get them on right...awesome product for sure

looks awesome!

Finished assembling the steering linkage, sway-bar, shocks and track bar...

Attachment 374021

Since going to the disk brake conversion, i had to figure out something for the parking brake...I used Parts Mike parking brake disk on the back of my Atlas...

Attachment 374022

Attachment 374023

Finished reassembling the interior with a pair of Corbeau Baja XRS seats...decided to power wash the carpets and put it back in too...really wanted to keep the noise down as much as possible...

Attachment 374024

Attachment 374025

I had the XJ on the rack over at S&S Custom Off-Road for the exhaust system. New pipes from the manifold back...

Attachment 374026

They decided they wanted to bring it back to my shop in proper form...S&S wanted to "move" there tow rig around a little bit...

Attachment 374027

Attachment 374028

Looks awesome man. Suppose that's the new ORFAB winch bumper? Looks beefy

This thing is so beautiful I want to cry. I would kill for your budget. You have some skill man

Well...here is the end result after about 4 months of work...finished up with all the OR-Fab bumpers and armor, Gobi USA roof rack and all the Rigid Industries LED light bars...it's about 95% done at this point...brought it into the paint booth for some photos after getting everything mostly done...

Attachment 373999

Attachment 374000

Attachment 374001

Attachment 374002

Attachment 374003



Attachment 374004

Attachment 374005

Attachment 374006

Attachment 374007

Attachment 374008

Attachment 374009

Just to lay the record straight...I didn't come up with the name, a friend of mine did as a joke while i was finishing it up and it kind of stuck with it for some reason....SO! as a small tribute to FIAT (who owns Ferrari...and of course Chrysler/Jeep since '09) we dubbed this XJ "Ferrar Jeep"....that...and the paint that Beal's auto body used really was Ferrari red (they had a wrecked F550 in the shop, that was getting some work done, and had extra left over...go figure)...all i need now is to find one of those V12's laying around....

Attachment 373997

Attachment 373998

nice jeep so clean and look bad a$$

jeep is freakin amazing budget must be huge and i am guessing your rocking some products OR-Fab should be releasing????

Yeah...you could say that :shifty: haha! Should be able to order them soon...

Thanks mcguyver! it's been a long couple of months, i'm real happy with the way it all turned out...

This is probably one of the sickest jeep I have EVER seen. I just looked at the pictures ha sorry but roughly about how much have you put in to it? Just out of curiosity. And if you don't want to say, then I understand. But seriously, that's awesome.

Dang man amazing looking jeep. I know this took a ton of hard work. Great job!

Did you design or have input on the new ORF products on your jeep? They look sweet!

instant COTM. lets see it eating some trails!