When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
After working on my POS Ford for a week, I decided to put a little time into Daisy. I got a new Kicker 10" sub wired all in with a cheap pioneer deck, and it sounds great!
Neither have I and I currently own two 4.0 liter 5 speed trucks, both of which came from the factory with 3.07s.
Maybe OP's truck has been swapped. How slow is it haha!
Yeah you guys were right. I checked my tags and they were 3.07, had no idea Haha. Yeah with the bigger tires 1st gear is useless but is cruises down the freeway at 80!
Decided to tackle my diffs today. Got all my stuff at NAPA, love that store. Cleaned up the diff covers, put new gaskets with a lil rtv, and looking good. Of course the bottles had a little clearance issues at the end...
Tell me those little pumps are not the best. LOL.
I have two. One for gear oil and one for the tranny fluid in the transfer case.
When the one bottle gets low you use a new bottle and then dump what is left in the first one into the second one.
Tell me those little pumps are not the best. LOL.
I have two. One for gear oil and one for the tranny fluid in the transfer case.
When the one bottle gets low you use a new bottle and then dump what is left in the first one into the second one.
Yeah they're little pieces of crap haha. But when you pour the rest into the other bottle, and run out of that bottle, ur SOL. That's why I resorted to my little scheme haha
The last time I did my tranny oil, I put in GL-5, not knowing how harmful it is for the brass syncros. So today i decided to do a flush. I tried to find the best one for GL-3 rating, but that stuff is apparently ancient. But I read up on Red Line MT-90, and how it can be applied for a GL-3 rating. Everybody with an AX15 hyped up how great it is, so that's the one I went with. Success!
04-11-2019, 01:20 PM
So today i decided to do a flush. I tried to find the best one for GL-3 rating, but that stuff is apparently ancient. But I read up on Red Line MT-90, and how it can be applied for a GL-3 rating. Everybody with an AX15 hyped up how great it is, so that's the one I went with. Success!
