"the Cherk" build
1 Attachment(s)
i picked up this '93 zj for 1800 bones....bone stock except for the gremlins under the hood. replaced a moody coil and the dreaded crank sensor...plugs ,wires,etc....
|
1 Attachment(s)
i'm going the budget route so i went with a 4'' Rough Country lift and Pro Comp shoes and socks....31x10.50's on 15''' rims with 3.75 backspacing. also trimmed th exess plastic of the stock bumper cover to tide me over till i get a bumper or 2 made....
|
2 Attachment(s)
the rear tire to well spacing bugs me on the zj's(among other things) so i did some trimming on the door side for now...i took a pic of the stock right side but the left was closer to the air compressor so i started there....
|
2 Attachment(s)
i trimmed the scrap piece and tacked it back in....been a while since ive welded sheet metal but it itll work...
|
1 Attachment(s)
finished up with some primer and red paint that almost matches and made a cap from the trimmings for the rocker plastic....
|
1 Attachment(s)
much better...
|
All times are GMT -5. The time now is 09:09 AM. |
© 2024 MH Sub I, LLC dba Internet Brands