Building Eugene
07-02-2017, 06:26 PM
#19
CF Veteran
Join Date: Apr 2016
Location: Pasquotank, NC
Posts: 1,679
Likes: 0
Received 15 Likes
on
13 Posts
Year: 1990
Model: Cherokee
Engine: 4.0
You say that now....
I am tired of mud on my jeep! Working on the undercarriage, caked mud dropping on you. Dropping in your eyes. Trapping moisture against the undercarriage. It is important to wash that mud off the undercarriage to keep the rust away. Then you have to regrease the suspension after you wash it away with the mud...
Nice project.
I am tired of mud on my jeep! Working on the undercarriage, caked mud dropping on you. Dropping in your eyes. Trapping moisture against the undercarriage. It is important to wash that mud off the undercarriage to keep the rust away. Then you have to regrease the suspension after you wash it away with the mud...
Nice project.
07-06-2017, 11:22 PM
#20
Junior Member
Thread Starter
Join Date: Apr 2017
Location: spokane
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4banger
You say that now....
I am tired of mud on my jeep! Working on the undercarriage, caked mud dropping on you. Dropping in your eyes. Trapping moisture against the undercarriage. It is important to wash that mud off the undercarriage to keep the rust away. Then you have to regrease the suspension after you wash it away with the mud...
Nice project.
I am tired of mud on my jeep! Working on the undercarriage, caked mud dropping on you. Dropping in your eyes. Trapping moisture against the undercarriage. It is important to wash that mud off the undercarriage to keep the rust away. Then you have to regrease the suspension after you wash it away with the mud...
Nice project.
On other news I painted the death twinkie shifter ...then I made another one to paint white they turned out so so
I probably will make more pix to come after they dry and I install them
07-21-2017, 07:41 PM
#23
Junior Member
Thread Starter
Join Date: Apr 2017
Location: spokane
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4banger
help needed badly
so I was cruising east on I-90 ...eugene started bucking and acting like it was running out gas ...Not possible cause I just fill it up to the top
well in trying to getting him home I pulled the front bumper off
gold lining I get to build a new bumper to put up there
lead lining I dont know what is wrong so any help from the more learned members of this forum chime in
my list of culprits is fuel pump or filter either could cause this ...but I cant find the filter location in my book
well in trying to getting him home I pulled the front bumper off
gold lining I get to build a new bumper to put up there
lead lining I dont know what is wrong so any help from the more learned members of this forum chime in
my list of culprits is fuel pump or filter either could cause this ...but I cant find the filter location in my book
07-21-2017, 07:46 PM
#24
CF Veteran
Join Date: Jun 2016
Location: York PA
Posts: 2,929
Likes: 0
Received 5 Likes
on
5 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 Litre I6
so I was cruising east on I-90 ...eugene started bucking and acting like it was running out gas ...Not possible cause I just fill it up to the top
well in trying to getting him home I pulled the front bumper off
gold lining I get to build a new bumper to put up there
lead lining I dont know what is wrong so any help from the more learned members of this forum chime in
my list of culprits is fuel pump or filter either could cause this ...but I cant find the filter location in my book
well in trying to getting him home I pulled the front bumper off
gold lining I get to build a new bumper to put up there
lead lining I dont know what is wrong so any help from the more learned members of this forum chime in
my list of culprits is fuel pump or filter either could cause this ...but I cant find the filter location in my book
I'm not sure of the pressure spec for 96 and lower. I know my 2001 is 49 PSI plus or minus 5. Yours may be different.
07-21-2017, 08:52 PM
#25
Junior Member
Thread Starter
Join Date: Apr 2017
Location: spokane
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4banger
a nice dude at another site said this
"check the firewall above the master cylinder. there is a ceramic resistor for the fuel pump. bypass it and see if that fixes it."
so I will try that too
it is 20 miles away so getting it home is first
off to do just that
"check the firewall above the master cylinder. there is a ceramic resistor for the fuel pump. bypass it and see if that fixes it."
so I will try that too
it is 20 miles away so getting it home is first
off to do just that
07-22-2017, 12:18 AM
#27
Junior Member
Thread Starter
Join Date: Apr 2017
Location: spokane
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4banger
it is at home now
I think it is a filter problem it started when I got back to it
got a filter and it will be put in soon
I think it is a filter problem it started when I got back to it
got a filter and it will be put in soon
07-25-2017, 05:07 PM
#28
Junior Member
Thread Starter
Join Date: Apr 2017
Location: spokane
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4banger
I changed the filter and checked codes I got a 11 12 24 55
I changed the tps (for peace of mind ) now I got fuel at the bleeder but no start
I cleared the codes and still no start and I get a 12 and 55
I changed the tps (for peace of mind ) now I got fuel at the bleeder but no start
I cleared the codes and still no start and I get a 12 and 55
08-03-2017, 02:03 PM
#30
Junior Member
Thread Starter
Join Date: Apr 2017
Location: spokane
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4banger
now this thing is teasing me by starting and running great then dieing and and not starting again so I am back to sensors?????
Btw I didnt get a cap or rotor yet
Btw I didnt get a cap or rotor yet