building of the 91 XJ
#1
Junior Member
Thread Starter
Join Date: Jul 2011
Location: Nashville
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0
building of the 91 XJ
ok I know I need to add the pics and they will be up soon. but the 6.5 rough country life and the 35" tires are on and seem to be good but the bad news is I lost the t case so have to get a new one of them. hope that will happen in the next week. but will up load the pics tomorrow afternoon so you all can pick them apart..lmao
#4
Junior Member
Thread Starter
Join Date: Jul 2011
Location: Nashville
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0
went to put it in 4 wheel high to move it around the shop and nothing would not go into gear. when looking at the t case we could see it slipping in but not turning the front drive shaft. got to love it.. so we lost it and has to be rebuilt or replaces... and will cost about the same to rebuilt as to replace.
Trending Topics
#9
CF Veteran
Join Date: Feb 2010
Location: Atlanta
Posts: 1,497
Likes: 0
Received 0 Likes
on
0 Posts
Year: 90
Model: Cherokee
Engine: 4.0
I live in dallas and go through marietta to smyrna evryday for work. Have a spare with 120k on it. Lmk asap and ill swing it by one day after work(im off at 330 everyday.).
Thanks and like the jeep~Paul 6785491348
Thanks and like the jeep~Paul 6785491348
#10
Junior Member
Thread Starter
Join Date: Jul 2011
Location: Nashville
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0
oh yea that would help me out big time, I work wensday through sat over night, from 8 pm to 7 am
#11
Junior Member
Thread Starter
Join Date: Jul 2011
Location: Nashville
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0
ok so here is the update on the build:
transfer case is fine it is the vacuum that is bad, the egg has a whole in it so that is what is causing the 4wheel high not to work, posie lock will fix that. the break lines are on upside down, the upper and lower control arm bushing are shot, the steering stabliser is gone, the front sway bar bushing are being replaced, and few other little things. and to kick it all off the new drive shaft is 3" to short. so they are having to get me a new one. will be in on monday, so another fast trip up north to put all this up and to swap out drive shafts and the bad wheel.
oh what fun. still have yet to drive the jeep since the lift was put on..lol
transfer case is fine it is the vacuum that is bad, the egg has a whole in it so that is what is causing the 4wheel high not to work, posie lock will fix that. the break lines are on upside down, the upper and lower control arm bushing are shot, the steering stabliser is gone, the front sway bar bushing are being replaced, and few other little things. and to kick it all off the new drive shaft is 3" to short. so they are having to get me a new one. will be in on monday, so another fast trip up north to put all this up and to swap out drive shafts and the bad wheel.
oh what fun. still have yet to drive the jeep since the lift was put on..lol
#13
Member
Join Date: Apr 2011
Location: Duluth GA
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
ok so here is the update on the build:
transfer case is fine it is the vacuum that is bad, the egg has a whole in it so that is what is causing the 4wheel high not to work, posie lock will fix that. the break lines are on upside down, the upper and lower control arm bushing are shot, the steering stabliser is gone, the front sway bar bushing are being replaced, and few other little things. and to kick it all off the new drive shaft is 3" to short. so they are having to get me a new one. will be in on monday, so another fast trip up north to put all this up and to swap out drive shafts and the bad wheel.
oh what fun. still have yet to drive the jeep since the lift was put on..lol
transfer case is fine it is the vacuum that is bad, the egg has a whole in it so that is what is causing the 4wheel high not to work, posie lock will fix that. the break lines are on upside down, the upper and lower control arm bushing are shot, the steering stabliser is gone, the front sway bar bushing are being replaced, and few other little things. and to kick it all off the new drive shaft is 3" to short. so they are having to get me a new one. will be in on monday, so another fast trip up north to put all this up and to swap out drive shafts and the bad wheel.
oh what fun. still have yet to drive the jeep since the lift was put on..lol
#15
Junior Member
Thread Starter
Join Date: Jul 2011
Location: Nashville
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0
sorry for the late response GA Boy, but all I had to do is call the shop where I got the kit and tell them they sent me the wrong drive shaft and they ordered the right one. the shop has it now and hope to have it back tomorrow or fri by they latest..crossing fingers..lol...any ways all is looking good for a nice ride on sunday to break her in. thinking about hitting one of the state parks