Build Herokee
#1
Senior Member
Thread Starter
Join Date: Apr 2009
Location: central IL
Posts: 845
Likes: 0
Received 0 Likes
on
0 Posts
Year: 01
Model: Cherokee
Engine: 4.0
Build Herokee
well i traded my 92 night flare side
For my 99 Herokee with 5 inch lift
Plans are bumpers flares rear shocks cb rear tire carrier
For my 99 Herokee with 5 inch lift
Plans are bumpers flares rear shocks cb rear tire carrier
#4
Senior Member
Thread Starter
Join Date: Apr 2009
Location: central IL
Posts: 845
Likes: 0
Received 0 Likes
on
0 Posts
Year: 01
Model: Cherokee
Engine: 4.0
It does awesome i'm very happy with it got some shots in my fender flare thread check it out (installed my new flares )
Trending Topics
#9
Senior Member
Thread Starter
Join Date: Apr 2009
Location: central IL
Posts: 845
Likes: 0
Received 0 Likes
on
0 Posts
Year: 01
Model: Cherokee
Engine: 4.0
#12
Senior Member
Thread Starter
Join Date: Apr 2009
Location: central IL
Posts: 845
Likes: 0
Received 0 Likes
on
0 Posts
Year: 01
Model: Cherokee
Engine: 4.0
I don't like the look with out them and it's illegal around here and i want to avoid the popo if ya no what i mean also to cut down on the rocks breakin and more of my mirrors
#13
Senior Member
Thread Starter
Join Date: Apr 2009
Location: central IL
Posts: 845
Likes: 0
Received 0 Likes
on
0 Posts
Year: 01
Model: Cherokee
Engine: 4.0
Today i Made some brackets to hold my quick disconnects out of the way when they are unhooked
Painted my antenna after i cut it down to about 17 inches
installed 2 new o2 sensors
Removed the spare tire from the inside i found a factory spare tire rack for the rear is this a goo idea or should i make my own?
Painted my antenna after i cut it down to about 17 inches
installed 2 new o2 sensors
Removed the spare tire from the inside i found a factory spare tire rack for the rear is this a goo idea or should i make my own?
#14
Senior Member
Join Date: Dec 2008
Posts: 543
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1987
Model: Cherokee
Engine: 4.0 soon to be gc ho 4.0
if you can beef it up a little it will hold a 33 but not to comfortably.....the last one i had pulled away from mount n body i used a 6x6 3/16 plate on both sides and it held a 33 fine bouncing around on the trails...
#15
Senior Member
Thread Starter
Join Date: Apr 2009
Location: central IL
Posts: 845
Likes: 0
Received 0 Likes
on
0 Posts
Year: 01
Model: Cherokee
Engine: 4.0
Ya i'm goin to ad a little bit more lift spacers and shackles to clear them a little better and trim them some more the 33s rub a little but they do flex good i cut the inner support out also i'm goin to install bump stops to help