"Bug-Out XJ" Daily Driver '99 XJ
#46
Junior Member
Thread Starter
Join Date: Jul 2012
Location: Emerald Isle, NC
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: I-6, 4.0L
Its holding up good, now keep in mind its nowhere as thick as most "bed Liners" but thats what I like about it, i didnt want the real heavy stuff, but the great thing is if i scuff it i just touch it up with a quick spray from the can. Its more of a brush protector....
#47
Junior Member
Thread Starter
Join Date: Jul 2012
Location: Emerald Isle, NC
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: I-6, 4.0L
Some more pics (threads are no fun without pics), got the fender flares on today, they are from Rusty's Offroad 4" flare.
One is of my son, he insisted that I put it up, he has helped his dad alot, and hes all about killing zombies., so he says the jeep has to be big enough to run over zombies while we get mom to safety...
One is of my son, he insisted that I put it up, he has helped his dad alot, and hes all about killing zombies., so he says the jeep has to be big enough to run over zombies while we get mom to safety...
Last edited by CrazyV; 08-31-2012 at 01:47 PM.
#48
Junior Member
Join Date: Mar 2011
Location: Pinellas, FL
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0!
I absolutely love your rig! I just might have to steal your tire/rim combo -- it looks sick!
How was cutting into the fenders? I'm scared to death of doing that to mine...
Also, nice touch on the decal in the back.
How was cutting into the fenders? I'm scared to death of doing that to mine...
Also, nice touch on the decal in the back.
#49
Junior Member
Thread Starter
Join Date: Jul 2012
Location: Emerald Isle, NC
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: I-6, 4.0L
So far I love the tires, with the fenders on the rear there are small spot welds and I just trimmed to them. On the front I think I just marked around 2 1/2 inches all the way around, I played it safe. Looked at it for a long time before I started cutting, just measure twice and take your time, wish I had done it sooner.
#50
Seasoned Member
Join Date: Nov 2010
Location: Arlington
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 ltr
Thanx man,
So far I love the tires, with the fenders on the rear there are small spot welds and I just trimmed to them. On the front I think I just marked around 2 1/2 inches all the way around, I played it safe. Looked at it for a long time before I started cutting, just measure twice and take your time, wish I had done it sooner.
So far I love the tires, with the fenders on the rear there are small spot welds and I just trimmed to them. On the front I think I just marked around 2 1/2 inches all the way around, I played it safe. Looked at it for a long time before I started cutting, just measure twice and take your time, wish I had done it sooner.
Here is what i ended up with
#52
Seasoned Member
Join Date: Nov 2010
Location: Arlington
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 ltr
#53
Junior Member
Thread Starter
Join Date: Jul 2012
Location: Emerald Isle, NC
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: I-6, 4.0L
Well went out on my father in-laws property and decided to do some trail blazin down 4 wheeler trails, tested out the bed liner on the jeep. It held up really well, you can se all the bark but nothing made it through the liner.
#57
Junior Member
Thread Starter
Join Date: Jul 2012
Location: Emerald Isle, NC
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: I-6, 4.0L
Originally Posted by Power73
haha dont worry i think we all do it! jeep is looking good
Thread
Thread Starter
Forum
Replies
Last Post
Matt Krumwiede
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
09-19-2015 10:39 PM
ROCKRIDGE 4WD
Vendor Showcase
0
09-15-2015 01:21 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)