Boones Mill Boys = Project M80
#16
Junior Member
Thread Starter
Join Date: Sep 2009
Location: Boones Mill, Virginia
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L
Here's the 544's that I converted to full floating. I also side polished and balanced them, (small end=198g) (big end=456g).
#17
Junior Member
Thread Starter
Join Date: Sep 2009
Location: Boones Mill, Virginia
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L
And here's the 691's that I also side polished and balanced. Both sets were resized to 2.2085". (small end=201g) (big end=455g)
#19
Junior Member
Thread Starter
Join Date: Sep 2009
Location: Boones Mill, Virginia
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L
Last day of the session today, will either be moving back or just going home to visit later this week. Will most likely be working on this sometime while I'm down there. I will also try to get some race footage up while I'm at it.
#21
Junior Member
Thread Starter
Join Date: Sep 2009
Location: Boones Mill, Virginia
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L
Hey guys its been a while since I've updated this bad boy. Moved back to Virginia a few weeks ago. So here is pictures of the bumper/skid plate combination I made, and the new American Racing wheels we picked up.
#23
Junior Member
Thread Starter
Join Date: Sep 2009
Location: Boones Mill, Virginia
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L
I'm workin on the race footage. Just have to get the Flip from my dad long enough to do so. I'll take a couple of more pictures. I'm actually getting ready to build some more bumpers like it. I'm going to have to build a winch version also for my dad's Cherokee. I'm looking into selling these if you or anyone else are interested. Currently in the process of buying an Iron worker, so that tied up my Jeep funds. Once its paid off money should be going towards the stroker build and getting this set up......
Will also have pictures of the gauge swap, I did this weekend!!
Will also have pictures of the gauge swap, I did this weekend!!
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)